If the settings are OK, click Next. Otherwise click Back. If you want to change
9
anything other than the user accounts, keep clicking Back until you can change
the wizard type to manual.
Figure 24 Confirm Settings
10 Wait while the NAS Starter Utility configures the NSA.
Figure 25 Setting the NAS
After the NAS Starter Utility finishes configuring the NSA, you can click Show the
directory of the NAS to see the NSA's shares (see
NSA210 User's Guide
Chapter 2 NAS Starter Utility
Section 2.5.3 on page
44) or
43