Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Electrolux Professional DC6-4HP
Summary of Contents for Electrolux Professional DC6-4HP
- Page 1 Installation manual Drying Cabinet DC6-4HP 427001220/GB, IE Original instructions 2024.12.05...
- Page 3 Contents Contents 1 Safety Precautions ..........................5 General safety information......................5 Symbols............................5 2 Technical data.............................6 Dimensions drawing........................6 Technical data ...........................7 3 Installation kit ............................8 4 Installation ............................9 Unpacking ..........................9 Placement ..........................9 Ventilating the room ........................9 Attachment to the wall ......................10 5 Reversing the door ..........................11 6 Connection to floor drain ........................14 7 Electrical connection..........................15 8 Language setting..........................16...
- Page 5 Installation manual 1 Safety Precautions WARNING. This appliance is intended only for drying textiles washed in water. DO NOT MODIFY THIS APPLIANCE. Servicing shall be carried out only by authorized personnel. Only authorized spare parts shall be used. When performing service or replacing parts, the power must be disconnected. Stationary appliances not fitted with means for disconnection from the supply mains hav- ing a contact separation in all poles that provide full disconnection under overvoltage cate- gory III, means for disconnection must be incorporated in the fixed wiring in accordance...
- Page 6 Installation manual 2 Technical data 2.1 Dimensions drawing fig.X01810 Control panel Connecting cable 2.5 m Condensation connection if the floor drain option is selected Condense water pump, 0.5 m pressure height 1910 1925 1077...
- Page 7 Installation manual 2.2 Technical data Capacity: 4.0 kg of laundry Drainage capacity: 30 g/min (4 kg 50% residual moisture) Electrical connection: 1-phase 220–240 V, 50–60 Hz, 10 A Power: 1200 W Main fan capacity: 1175 m /h (free blowing) Sub-fan capacity: 160 m /h (free blowing) Hanging length:...
- Page 8 Installation manual 3 Installation kit D x 2 A x 2 E x 1 B x 4 F x 1 C x 2 fig.W01303 Screw TRX 5x45 galvanized for wall mounting Screw MRT 5x20 for mounting bracket Wall plug Bracket for wall bracket Hand brush for filter cleaning User Manual / Installation Manual...
- Page 9 Installation manual 4 Installation Place the drying cabinet on its final position. Level the drying cabinet with the adjustable feet. Adjust the feet from the outside. fig.W01285 4.1 Unpacking Unpack the drying cabinet and check that it has not been damaged in transit. Any damage to the drying cabinet and/ or the packaging must be reported within 7 days.
- Page 10 Installation manual 4.4 Attachment to the wall The drying cabinet must be secured to the wall to prevent it from tipping over. (Kit for this included upon delivery.) The installation kit contains two angle brackets that are mounted on the upper part of the drying cabinet as illus- trated.
- Page 11 Installation manual 5 Reversing the door The cabinet is delivered from the factory with a right-hung or left-hung door. The door can be rehung later. A rehanging kit is required to reverse the hanging of the door. This can be ordered as a spare part. Rehanging kit The kit’s part number is 432731280.
- Page 12 Installation manual Carefully lay the cabinet on its back. Remove the protective cover (4) from the upper hinge (5) and release the door cable (6). Remove the hinge, which is secured with two screws. Carefully pull the hinge loose from the cable. Discard the hinge.
- Page 13 Installation manual Move the lower hinge (8) to the other side. The hinge should be reversed and the hinge pin unscrewed and rein- stalled on the other side of the hinge. Make sure that you tighten the hinge pin properly. Remove the blanking plugs (9) and the door handle (10).
- Page 14 Installation manual 6 Connection to floor drain The drying cabinet comes with a preinstalled hose for connection to a floor drain. Position the drain hose (A) in one of the cutouts in the plate (B) so there is no risk of it being pinched. Route the drain hose to the drain.
- Page 15 Installation manual 7 Electrical connection The electrical installation may only be performed by qualified personnel. The drying cabinet is delivered ready for connection, with cable and grounded plug. Electrical connections Heating alternative Main voltage Heating power Total power Recommended fuse Machines with heat pump 230V 1~ Total power and recommended fuse does not depend on the heating power in those cases.
- Page 16 Installation manual 8 Language setting • Activate the programming mode: Press STOP + SUN + BUTTERFLY. Press the Stop button first and then the pro- gram selection buttons simultaneously. The display lights up and shows "ACCESS 1000". To be able to move on, code 9191 must replace the code 1000.
- Page 17 Installation manual 9 Function check May only be performed by qualified personnel. A function check must be performed when the installation is finished and before the appliance can be used. Whenever a repair has been made, a function check must be performed before the appliance can be used again. •...
- Page 18 Installation manual 10 Disposal information 10.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
- Page 20 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...
Need help?
Do you have a question about the DC6-4HP and is the answer not in the manual?
Questions and answers