Related Manuals for Electrolux Professional DC6-14
Summary of Contents for Electrolux Professional DC6-14
- Page 1 Installation manual Drying Cabinet DC6-14 427001194/EN Original instructions 2022.03.18...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 General safety information......................5 Symbols............................5 2 Technical data.............................6 3 Delivery ..............................7 Transport unit ..........................7 Box 1 ............................7 Recommended tools ........................8 Placement ..........................9 4 Assembly instructions ........................10 Bottom plate ..........................10 Back piece ..........................11 Side pieces ..........................12 Roof............................13 Doors............................14 Door adjustment ........................15... -
Page 5: Safety Precautions
Installation manual 1 Safety Precautions This appliance can be used in public areas. Remove all objects from pockets such as lighters and matches. WARNING. This appliance is intended only for drying textiles washed in water. DO NOT MODIFY THIS APPLIANCE. Servicing shall be carried out only by authorized personnel. -
Page 6: Technical Data
Installation manual 2 Technical data fig.W01350 1805 1805 1560 1885 1325 Air outlet Exhaust air connection ⌀ 200 mm, maximum permitted pressure drop 70 Pa, which corresponds to a straight pipe with a length of approx. 23 m. Net weight: 175 kg. Connections ⌀... -
Page 7: Delivery
Installation manual 3 Delivery The cabinet is delivered unassembled on a transport unit. The cabinet component is assembled as instructed in this manual. The electric fan heater is fully assembled upon delivery. 3.1 Transport unit The transport unit contains 5 boxes with the content described below. 1950 200 kg 1040... -
Page 8: Recommended Tools
Installation manual User Manual (OM) / Installation Manual (IM) / Assembly Instructions / Wiring Diagram / Disposal Instructions 3.3 Recommended tools fig.W01312 Bits Torx, T10, T20, T25, T30. Allen key 4.0 Socket 10 mm and 13 mm Fixed wrench 7 mm Slotted screwdriver 0.5 x 3 Slotted screwdriver 8 x 150 Other tools as illustrated. -
Page 9: Placement
Installation manual 3.4 Placement The drying cabinet intended for placement indoors in dry place. Place the bottom plate in the final position of the drying cabinet. The drying cabinet should be positioned so that there is plenty of room for working, both for the user and service personnel. -
Page 10: Assembly Instructions
Installation manual 4 Assembly instructions 4.1 Bottom plate fig.W01313 Bag / Quantity Box 1 Cover plug M4x12 End cap Cover plug Lock nut M4 Magnetic holder Magnet Foot screw... -
Page 11: Back Piece
Installation manual 4.2 Back piece fig.W01314 Bag / Quantity Box 1 M6x10... -
Page 12: Side Pieces
Installation manual 4.3 Side pieces fig.W01353 Bag / Quantity Box 1 M6x10 M6x10... -
Page 13: Roof
Installation manual 4.4 Roof fig.W01351 Bag / Quantity Box 1 M6x10 Cover Evacuation connection RTK B8, 4.2x6.5... -
Page 14: Doors
Installation manual 4.5 Doors fig.W01352 Bag / Quantity Box 1 Lock nut Magnet M4x12 Handle... -
Page 15: Door Adjustment
Installation manual 4.6 Door adjustment fig.W01318 Bag / Quantity Box 1 Washer 7x12x1.5... -
Page 16: Wall Bracket
Installation manual 4.7 Wall bracket fig.W01319 Bag / Quantity Box 1 M6x16 Lock washer 6.4x11x0.7 Washer 16x6x1 Wall bracket... -
Page 17: Glove Hanger
Installation manual 4.8 Glove hanger fig.W01341 Bag / Quantity Box 1 M5x14 Plastic washer 5.3x15x1.2 Washer 5x13x1 Nylock M5... -
Page 18: Hanger Assembly
Installation manual 4.9 Hanger assembly fig.W01322 Bag / Quantity Box 1 Plastic washer 8x25x1.5 Washer 8x25x1.5 Lock nut M8 M8x75... - Page 19 Installation manual fig.W01323 Bag / Quantity Box 1 Metal screw 4.32x32 Washer 4x10x1 Door stop...
-
Page 20: Hanger Installation
Installation manual 4.10 Hanger installation fig.W01342 Bag / Quantity Box 1 Spacer plate (Chapter 4.4 Roof) Upper bracket Lower bracket... - Page 21 Installation manual X = X 0 - 2x fig.W01325...
-
Page 22: Fan Heater
Installation manual 4.11 Fan heater fig.W01343 Bag / Quantity Box 1 M6x10 Bracket Right Bracket Left M6x10 Seal Left Upper Seal Right Lower... - Page 23 Installation manual fig.W01344 To prevent malfunctions and optimize the drying process, the fan heater must be installed in such a way that there is a gap of approx. 15 mm between the fan heater and the side of the cabinet. fig.W01345 approx.
-
Page 24: Electrical Box
Installation manual 4.12 Electrical box fig.W01346 Bag / Quantity Box 1 Electrical box Sheettracs 4x9.5 Cable entry M20 Lock nut M20 Cable gland M20 Cable/electronics box Lock nut 22.5PG16 Lock nut M20 Cable entry M25 Lock nut M25 Cable gland PG16... - Page 25 Installation manual The electrical box contains electronics and moisture sensors that control the drying process and turns off the appli- ance when the laundry is dry. The electrical box is installed on the left side of a cabinet in left-mounted door version on the right side for a right- mounted door version.
-
Page 26: Recycling Instruction For Packaging
Installation manual 5 Recycling instruction for packaging fig.X02423 Fig. Description Code Type Wrapping film LDPE 4 Plastics Plastic cover LDPE 4 Plastics Cardboard protection box PAP 20 Paper Pallet/Cage FOR 50 Wood Wrapping film LDPE 4 Plastics Plastic bag LDPE 4 Plastics Plastic bag LDPE 4... -
Page 27: Evacuation System
Installation manual 6 Evacuation system 6.1 Fresh air The drying cabinet has an exhaust air flow of up to 400 cubic meters per hour. This air is initially taken from the room where the drying cabinet is situated. It is therefore important to ensure that fresh air can enter the room from the outside to replace the humid air that is vented out. -
Page 28: Multiple Cabinets
Installation manual 6.3 Multiple cabinets If multiple drying cabinets or dryers are connected to the same air duct, a non-return valve must be installed on each appliance to prevent cold air from entering or the air pressure of one appliance affecting the other. fig.W01349 Number of cabinets... -
Page 29: Electrical Connection
Installation manual 7 Electrical connection The electrical installation may only be performed by qualified personnel. Electrical connection of the cabinet must be done in accordance with electrical safety regulations. Make sure that the connection current is in line with the data on the identification plate and that the mains cable is grounded properly according to the applicable standard. - Page 30 Installation manual Use the program buttons to move to Parameter 117, and enter the parameter using the Stop button. Select the baud rate that matches the setting in ELS Vision: 0: off, 1: 2400 bps, 2: 4800 bps, 3: 9600 bps. Use the Stop button to exit the parameter.
-
Page 31: Function Check
Installation manual 8 Function check May only be performed by qualified personnel. A function check must be performed when the installation is finished and before the appliance can be used. Whenever a repair has been made, a function check must be performed before the appliance can be used again. •... -
Page 32: Disposal Information
Installation manual 9 Disposal information 9.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 36 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...
Need help?
Do you have a question about the DC6-14 and is the answer not in the manual?
Questions and answers