TP-Link VIGI InSight Series Quick Start Manual
Bullet network camera
Hide thumbs
Also See for VIGI InSight Series:
- Quick start manual (16 pages) ,
- Installation manual (2 pages) ,
- Installation manual (2 pages)
Related Manuals for TP-Link VIGI InSight Series
Summary of Contents for TP-Link VIGI InSight Series
- Page 1 Quick Start Guide InSight Series Bullet Network Camera *Images may differ from actual products. InSight S345S is used for demonstration in this guide.
- Page 2 Contents Chapter 1 Appearance ——————————— 1 Chapter 2 Installation ——————————— 3 Safety First ..............3 Mount the Camera ..........3 Install microSD Card (Optional) .......6 Connect Alarm (Optional) ........7 Waterproof (Optional) .........7 Chapter 3 Configuration —————————— 8 Appendix FAQ ——————————————— 10...
- Page 3 Chapter 1 Appearance The figure is for demonstration purposes only. Your device may differ in appearance from the depicted. InSight S345 / InSight S355 / InSight S385 ■ Grounding Terminal* at the bottom of the bracket IR LED Microphone Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings.
- Page 4 InSight S345S ■ Grounding Terminal* at the bottom of the bracket IR LED/White LED × 2 Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings. Speaker Lens Built-in Microphone microSD Card Slot: Unfasten the two fixed screws to remove the cover.
- Page 5 Chapter 2 Installation Safety First Make sure your power supply matches your camera. The power source ■ should comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1. Make sure that the wall is strong enough to withstand 4 times the ■...
- Page 6 2. Choose the mounting method. Option 1 Option 2 Option 3 3. Mount the camera according to your desired mounting method. Option 1 Ceiling Mounting ■ Φ6 mm Optional Φ25 mm Φ3 mm Option 2 Wall Mounting ■...
- Page 7 Φ6 mm Optional Φ25 mm Φ3 mm Option 3 Pole Mounting ■...
- Page 8 Install microSD Card (Optional) microSD Card RESET Button Slot microSD Card RESET Button Slot...
- Page 9 Connect Alarm (Optional) Scan for More Details Alarm Out Device (e.g. buzzer) Alarm In Device (e.g. senser) Waterproof (Optional) Note: It is recommended to waterproof the alarm interface even if no alarm equipment is connected.
- Page 10 If you are using your cameras with other NVR brands, follow the steps below. 1. Power on your cameras and connect them to the network. 2. Activate the cameras using the TP-Link VIGI app or web management page. 3. Refer to the NVR’s User Manual to add cameras.
- Page 11 2. Open the app and log in with your TP-Link ID. If you don’t have an account, sign up first. 3. Tap the + button on the top right and follow the app instructions to add your NVR. ■ You can view live video and modify camera settings via a web browser.
- Page 12 It’s recommended to use a Class 10 microSD card or higher, with storage from 8 GB to 512 GB. • Make sure you have initialized the microSD card via the TP-Link VIGI app or web management page. • If the problem still persists, contact our technical support.
Need help?
Do you have a question about the VIGI InSight Series and is the answer not in the manual?
Questions and answers