TP-Link VIGI InSight Series Quick Start Manual
Turret network camera
Hide thumbs
Also See for VIGI InSight Series:
- Quick start manual (16 pages) ,
- Installation manual (2 pages) ,
- Quick start manual (13 pages)
Related Manuals for TP-Link VIGI InSight Series
Summary of Contents for TP-Link VIGI InSight Series
- Page 1 Quick Start Guide InSight Series Turret Network Camera *Images may differ from actual products. InSight S445ZI is used for demonstration in this guide.
- Page 2 Contents Chapter 1 Appearance ——————————— 1 Chapter 2 Installation ——————————— 5 Safety First ..............5 Mount the Camera ..........5 Install microSD Card (Optional) .......9 Connect Alarm/Audio Device (Optional) ..9 Waterproof (Optional) .........10 Chapter 3 Configuration —————————— 11 Via NVR..............11 Via VIGI App ............12 Via Web ..............12 Appendix FAQ ———————————————...
- Page 3 Chapter 1 Appearance The figure is for demonstration purposes only. Your device may differ in appearance from the depicted. InSight S485/InSight S455/InSight S445 ■ Camera Base Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings. microSD Card Slot: Unfasten the two fixed screws to remove the cover.
- Page 4 InSight S445ZI ■ Camera Base Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings. microSD Card Slot: Unfasten the two fixed screws to remove the cover. Insert a microSD card for local storage. Initialize the SD card via VIGI app or other management tools before recording videos.
- Page 5 InSight S445S ■ Camera Base Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings. microSD Card Slot: Unfasten the two fixed screws to remove the cover. Insert a microSD card for local storage. Initialize the SD card via VIGI app or other management tools before recording videos.
- Page 6 InSight S485PI ■ Camera Base Reset: Unfasten the two fixed screws to remove the cover. Press for 5 seconds to reset the camera to factory settings. microSD Card Slot: Unfasten the two fixed screws to remove the cover. Insert a microSD card for local storage. Initialize the SD card via VIGI app or other management tools before recording videos.
- Page 7 Chapter 2 Installation Safety First Make sure your power supply matches your camera. The power source ■ should comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1. Make sure that the wall is strong enough to withstand 4 times the ■...
- Page 8 2. Determine the cable routing method. Option 1 Option 2 Route cables through the ceiling. Route cables through the side outlet. 3. Open the camera case.
- Page 9 4. Mount the camera base. For Option 1 Φ6 mm Φ25 mm Φ3 mm For Option 2 Φ6 mm Φ3 mm...
- Page 10 5. Connect Cables. Note: 1. Refer to 2.4. Connect Alarm/Audio Device (Optional) as necessary. 2. Refer to 2.5. Waterproof Cables as necessary 6. Secure the camera. Align the base's rim with the camera's Align the camera's screw hole with the lock groove, and snap the camera onto the icon on the base, and rotate the camera.
- Page 11 7. Adjust the surveillance angle, then fasten the camera securely. Pan: 0° to 360° Tilt: 0° to 75° Rotate: 0° to 360° Install microSD Card (Optional) microSD Card RESET Button Slot RESET RESET microSD Card RESET Button Slot Connect Alarm/Audio Device (Optional) Scan for More Details Alarm Out Device...
- Page 12 Scan for More Details Audio Out Device (e.g. speaker) Audio In Device (e.g. microphone) Waterproof (Optional)
- Page 13 Using your cameras with other NVR brands: Step 1: Power on your cameras and connect them to the network. Step 2: Activate the cameras using the TP-Link VIGI app or web management page. Step 3: Refer to the NVR’s User Manual to add cameras.
- Page 14 VIGI app. 1. Download and install the latest TP-Link VIGI app. 2. Open the app and log in with your TP-Link ID. If you don’t have an account, sign up first. 3. Tap the + button on the top right and follow the app instructions to add your NVR.
- Page 15 Try to add your camera manually. • For other NVR brands, make sure you have activated the camera by setting a password via TP-Link VIGI app or web management page. Q2. How do I know the camera is powered on? •...
Need help?
Do you have a question about the VIGI InSight Series and is the answer not in the manual?
Questions and answers