Aiwa NSX-A888 Operating Instructions Manual page 4

IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
Check
your system and accessories
There are no differences between the front speakers. Both
speakers can be connected as L (left) or R (right).
kEE&xEl
CX-NA888 Compact disc stereo cassette receiver
SX-WNA888 Front speakers
Remote control
AM antenna
FM antenna
1 Connect the right speaker to the main unit.
@ Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal,
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
2
@ Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R 0 terminal and the black cord
to the
O
terminal.
Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner as
step 1.
1
Right speaker
3
FM antenna AM antenna
Q
T
2
Left speaker
r
J—
'. _ ;
Speaker cord
u
" y.
c1
AC cord
+4
4
ENGLISH