Advertisement
Available languages
Available languages
,.
.,.
RANDOM /REPEAT PLAY
Use th~?remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT
while pressing SHIFT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display,
REF'EAT play — G lights up on the display.
RANDOM/REPEAT play — RANDOM and % light up on the
display,
Cancel — RANDOM and % disappear from the display.
To play all
discs,
press <>
to start play.
I!Wl!E!Y a Single disc, press one of DISC DIRECT PLAY 1-3 to
start pli~y.
Em
During random play it is not possible to skip to the previously
Iplayed track with -.
IBLANK "SKIP PLAY
-
The sik?nt portions between tracks recorded on a CD can be
skippecl during playback.
1
Press CD BLANK SKIP.
"CD BLANK SKIP ON" is displayed and a small dot appears
in ths display.
Small dot
2 Press 4
to start playback.
The silent portions between tracks will be skipped, and the
sourd will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.
To return to normal
playback
Press CD BLANK SKIP again, and "CD BLANK SKIP OFF" is
displayed and the dot in the display disappears.
[m
*
There may be a case where BLANK SKIP PLAY does not
functicm correctly.
o
BLANI< SKIP PLAY
is automatically canceled when performing
Al EDIT RECORDING
(page 22), PROGRAMMED
EDIT
RECCIRDING (page 23), or recording during PROGRAMMED
PLAY (page 19) or RANDOM PLAY (page 19).
Up to 30 tracks can be programmed from any of the inserted
discs.
—2
1
—3
1
—5
—-)w
L-J
Use the remote control.
1
2
3
4
5
Press PRGM twice while pressing SHIFT in stop
mode.
"PRGM" is displayed
PRGM
When PRGM is pressed once in step 1, the unit enters the
KARAOKE PROGRAM (page 25).
Press DISC DIRECT PLAY 1-3 to select a disc.
Go
to the next step when the tray stops rotating.
Press numbered buttons 0-9 and +1 Oto program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0,
Selected track number
Total number of
selected tracks
Program number
Total playing time of
the selected tracks
Repeat steps 2 and 3 to program other tracks.
Press +
to start play.
To check the program
Each time ++
or -
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the plrogram
Repeat steps 2 and 3 in stop mode, The track will be programmed
after the last track.
To change the programmed
tracks
Clear the program and repeat all the steps again.
To play the programmed
tracks repeatedly
After programming
the tracks,
press RANDOM/REPEAT
repeatedly while pressing SHIFT until G appears on the display.
m
During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. 'Can]t
USE" is displayed if you attempt to select a track.
"FULL' is displayed if you attempt to program more than 30
tracks.
ENGUSH I 9
Advertisement
