Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Electrolux EEG62310L
Summary of Contents for Electrolux EEG62310L
- Page 1 EEG62310L Dishwasher User Manual...
- Page 2 13. ENVIRONMENTAL CONCERNS..............27 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
- Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
- Page 4 Follow the maximum number of 9 place settings. • If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp •...
- Page 5 ENGLISH access to the mains plug after the • Do not drink and play with the water in installation. the appliance. • Do not pull the mains cable to • Do not remove the dishes from the disconnect the appliance. Always pull appliance until the programme is the mains plug.
- Page 6 • Disconnect the appliance from the household room illumination. mains supply. • Cut off the mains cable and discard it. 2.6 Disposal • Remove the door catch to prevent children and pets to get closed in the WARNING! appliance.
- Page 7 ENGLISH 4. CONTROL PANEL On/Off button / Reset button EXTRAS buttons Delay Start button AUTO Sense program button Display MY TIME selection bar 4.1 Display 4.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is.
- Page 8 5. PROGRAMME SELECTION 5.1 MY TIME 5.2 AUTO Sense MY TIME selection bar allows to select a The AUTO Sense programme suitable dishwashing cycle based on automatically adjusts the dishwashing programme duration. cycle to the type of load. The appliance senses the degree of soil and the amount of dishes in the baskets.
- Page 9 ENGLISH Programme Dishwasher Degree of Programme phases EXTRAS load soil • Prewash Not applicable Pre-rinse Crockery, Fresh, lightly • Dishwashing 60 °C • ExtraPower cutlery dried-on • Intermediate rinse • GlassCare • Final rinse 50 °C • ExtraHy‐ • AirDry giene 1h 30min Crockery,...
- Page 10 Water (l) Energy (kWh) Duration (min) 1) 2) Programme 2h 40min 9.4 - 11.5 0.876 - 1.071 0.628 AUTO Sense 8.3 - 11.5 0.677 - 1.036 120 - 170 Machine Care 8.3 - 10.1 0.593 - 0.725 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
- Page 11 ENGLISH available settings. For each setting, a The lights related to the Previous, OK dedicated bar of the ECOMETER and Next are on. flashes. How to change a setting The order of the basic settings presented in the table is also the order of the Make sure the appliance is in setting settings on the ECOMETER: mode.
- Page 12 Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener grees (°dH) grees (°fH) grees level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
- Page 13 ENGLISH the next programme. This activity Acoustic signals sound also increases the total water consumption of when a malfunction of the a programme by additional 4 litres and appliance occurs. It is not the total energy consumption of a possible to deactivate these programme by additional 2 Wh.
- Page 14 6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound.
- Page 15 ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release element (A) to open the lid (B). 2. Pour the rinse aid in the dispenser (C) until the liquid reaches the marking "FILL".
- Page 16 8.2 How to select and start a By default, options must be programme using MY TIME activated every time before selection bar you start a programme. If the latest programme 1. Slide your finger across MY TIME selection is enabled, the...
- Page 17 ENGLISH 8.7 How to cancel the delay programme duration. After closing the door, the appliance continues from the start while the countdown point of interruption. operates If the door is opened for more than 30 seconds Press and hold for about 3 seconds. during the drying phase, the The appliance returns to the programme running programme ends.
- Page 18 – Use the recommended dosage of 2. Make sure that the salt and rinse aid the detergent and rinse aid. containers are full. – Make sure that the current level of 3. Start the Quick programme. Do not the water softener agrees with the add detergent and do not put dishes hardness of the water supply.
- Page 19 ENGLISH • Make sure that the spray arms can 2. First remove items from the lower move freely before you start a basket, then from the upper basket. programme. After the programme is completed, water can still 9.6 Unloading the baskets remain on the inside surfaces of the appliance.
- Page 20 3. Reassemble the filters as instructed in this chapter. 10.4 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, 4. Wash the filters. abrasive cleaning pads or solvents.
- Page 21 ENGLISH CAUTION! 3. To install the spray arm back, press it An incorrect position of the downwards. filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
- Page 22 1. Pull out the upper basket. 4. To install the spray arm back, insert 2. To detach the spray arm, turn the the mounting element in the spray mounting element clockwise. arm and fix it in the duct by turning it counterclockwise.
- Page 23 ENGLISH Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
- Page 24 Problem and alarm code Possible cause and solution The appliance stops and • It is normal. It provides optimal cleaning results and starts more times during energy savings. operation. The programme lasts too • If the delay start option is set, cancel the delay set‐...
- Page 25 ENGLISH 11.1 The product number code 1. Press and hold simultaneously (PNC) for about 3 seconds. The display shows the PNC of your If you contact an Authorised Service appliance. Centre, you need to provide the product 2. To exit the PNC presentation, press number code of your appliance.
- Page 26 Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Do not place silver and stainless steel items close together.
- Page 27 ENGLISH Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1.0) Water supply max 60 °C Cold water or hot water Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
- Page 28 www.electrolux.com/shop...
Need help?
Do you have a question about the EEG62310L and is the answer not in the manual?
Questions and answers