Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EEG69405L
Summary of Contents for Electrolux EEG69405L
- Page 1 EEG69405L Dishwasher User Manual...
-
Page 2: Table Of Contents
13. ENVIRONMENTAL CONCERNS..............28 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
Only a qualified person must install this appliance. www.youtube.com/electrolux www.youtube.com/aeg • Remove all the packaging. How to install your AEG/Electrolux • Do not install or use a damaged 60 cm Sliding Door Dishwasher appliance. • Follow the installation instructions supplied with the appliance. - Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.
-
Page 6: Product Description
2.6 Disposal peripherals such as baskets and lids. • Concerning the lamp(s) inside this... -
Page 7: Control Panel
ENGLISH • The red light flashes when the The Beam-on-Floor is off appliance has a malfunction. when the appliance is deactivated. 4. CONTROL PANEL On/Off button / Reset button EXTRAS buttons Delay Start button AUTO Sense program button Display MY TIME selection bar 4.1 Display 4.2 ECOMETER The ECOMETER indicates how the... -
Page 8: Programme Selection
5. PROGRAMME SELECTION 5.1 MY TIME 5.2 AUTO Sense MY TIME selection bar allows to select a The AUTO Sense programme suitable dishwashing cycle based on automatically adjusts the dishwashing programme duration. cycle to the type of load. The appliance senses the degree of soil and the amount of dishes in the baskets. - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases EXTRAS load soil • Prewash Not applicable Pre-rinse Crockery, Fresh, lightly • Dishwashing 60 °C • ExtraPower cutlery dried-on • Intermediate rinse • GlassCare • Final rinse 50 °C • ExtraHy‐ giene • AirDry 1h 30min Crockery, Normal, lightly...
-
Page 10: Basic Settings
Water (l) Energy (kWh) Duration (min) 1)2) Programme 11.8 0.880 1h 30min 11.9 0.970 2h 40min 12.2 1.140 11.0 0.757 AUTO Sense 12.2 1.140 Machine Care 10.5 0.590 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH You can change the basic settings in To enter setting mode, press and hold setting mode. simultaneously about 3 seconds. When the appliance is in setting mode, The lights related to the Previous, OK the bars of the ECOMETER represent and Next are on.
- Page 12 Water hardness German de‐ French de‐ mmol/l mg/l (ppm) Clarke Water soften‐ grees (°dH) grees (°fH) degrees er level 47 - 50 84 - 90 8.4 - 9.0 835 - 904 58 - 63 43 - 46 76 - 83 7.6 - 8.3...
- Page 13 ENGLISH the next programme. This activity Acoustic signals sound also increases the total water consumption of when a malfunction of the a programme by additional 4 litres and appliance occurs. It is not the total energy consumption of a possible to deactivate these programme by additional 2 Wh.
-
Page 14: Before First Use
6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound. -
Page 15: Daily Use
ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. - Page 16 The upper ends of the two By default, options must be vertical ribs inside the activated every time before compartment (B) indicate you start a programme. the maximum level for filling If the latest programme the dispenser with gel (max.
-
Page 17: Hints And Tips
ENGLISH 8.7 How to cancel the delay paused. The display shows the current countdown status. After closing the door, start while the countdown the countdown resumes. operates Opening the door while the appliance operates may Press and hold for about 3 seconds. affect the energy The appliance returns to the programme consumption and the... - Page 18 • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
-
Page 19: Care And Cleaning
ENGLISH 9.6 Unloading the baskets • Put hollow items (cups, glasses and pans) with the opening facing 1. Let the tableware cool down before downwards. you remove it from the appliance. Hot • Make sure that glass items do not items can be easily damaged. - Page 20 CAUTION! If unable to remove the foreign objects, contact an Authorised Service Centre. 1. Disassemble the filters system as 2. Remove the filter (C) out of filter (B).
- Page 21 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance.
- Page 22 1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out. 4. To install the spray arm back, press the spray arm upwards and...
-
Page 23: Troubleshooting
ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers. - Page 24 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clog‐ The display shows i20.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution The remaining time in the • This is not a defect. The appliance is working cor‐ display increases and rectly. skips nearly to the end of the programme duration. Small leak from the appli‐ •...
- Page 26 11.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
-
Page 27: Technical Information
ENGLISH Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the • The level of salt is low, check the refill indicator. tableware, on the tub and on •... -
Page 28: Environmental Concerns
12.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database and product number that you can find on the rating plate of the appliance. Refer to The QR code on the energy label the chapter "Product description". - Page 32 www.electrolux.com/shop...
Need help?
Do you have a question about the EEG69405L and is the answer not in the manual?
Questions and answers