WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
similar accommodation where such use does not exceed (average) domestic usage levels. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between 0.05 (0.5) / 1 (10) MPa (bar). • Follow the maximum number of 14 place settings. •...
• Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket.
Refer to Safety chapters. 3.1 Building in min. 560 www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 1240 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
Page 8
appliance and may cause an injury. If the plastic cover is damaged, contact the Authorized Service Centre to replace it with the new one. 5 mm ENGLISH...
• The red light flashes when the appliance mobile device to be redirected to My has a malfunction. Electrolux Kitchen app in the app store. Follow the instructions on your mobile device to download the app. The Beam-on-Floor is off when the Scan the QR code with the scanner in My appliance is deactivated.
The lamp goes off when you close the door or off automatically after some time to save switch the appliance off. Otherwise, it goes energy. 5. CONTROL PANEL On/Off button / Reset button Option buttons (EXTRAS) Delay start button / Remote start button AUTO Sense program button Display MY TIME program selection bar...
45 °C. normal soil. This is the standard programme for test institutes. 6.4 Extras in the app My Electrolux Kitchen app provides additional dishwashing options. To access all options, connect your dishwasher to the app. See chapter "Wireless connection".
Page 12
Machine Care For cleaning the appliance interior. Not applicable • Cleaning 70 °C Refer to "Care and Cleaning". • Intermediate rinse • Final rinse • AirDry Automatic door opening during the drying phase. Refer to "Basic settings". Available only through My Electrolux Kitchen app. ENGLISH...
Consumption values Water (l) Energy (kWh) Duration (min) Programme 1)2) Quick 11.0 0.620 Pre-rinse 0.010 11.8 0.970 1h 30min 11.9 1.110 2h 40min 11.9 1.210 0.644 AUTO Sense 12.1 1.220 Machine Care 10.6 0.710 The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
You can change the basic settings in setting The lights related to the Previous, OK and mode. Next are on. When the appliance is in setting mode, the How to change a setting bars of the ECOMETER represent available settings. For each setting, a dedicated bar of Make sure the appliance is in setting mode.
1. Press and hold the on/off button until the negative effect on the washing results and on dishwasher is activated. the appliance. 2. Press and hold Previous and Next for 5 The higher the content of these minerals, the seconds. harder your water is.
7.5 The rinse aid level Water softener level Amount of water (l) The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid.
You can connect your dishwasher to the to the network and to the app home wireless network and then link it to your mobile devices in My Electrolux Kitchen app. To connect your dishwasher, you need: This functionality allows you to remotely •...
• The indicator is on. • The display shows On for a few If the credentials are not entered, the seconds. dishwasher cancels the procedure after • The appliance returns to the some time and returns to the programme programme selection. selection.
9.2 How to fill the rinse aid The salt is used to recharge the resin in the dispenser water softener and to assure good washing results in daily use. How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it.
10.1 Using the detergent Make sure that the indicator is on and your dishwasher is added in My Electrolux Kitchen app. If not, refer to "Wireless connection". 1. Press • The light related to the button is on. • The display shows APP.
10.7 How to delay the start of a 2. Close the appliance door to start the programme programme. 1. Select a programme. 10.5 How to activate EXTRAS 2. Double press 1. Select a programme using MY TIME The display shows 1h. selection bar.
10.11 The Auto Off function Opening the door while the remote start is activated deactivates this function. Activate This function saves energy by switching the the remote start again before you close the appliance off when it is not operating. door;...
– Make sure that the current level of the 3. Start the Quick programme. Do not add water softener agrees with the detergent and do not put dishes in the hardness of the water supply. baskets. – Follow the instructions in the chapter 4.
11.6 Unloading the baskets 1. Let the tableware cool down before you After the programme is completed, water remove it from the appliance. Hot items can still remain on the inside surfaces of can be easily damaged. the appliance. 2. First remove items from the lower basket, then from the upper basket.
12.4 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 12.5 Cleaning the filters 4. Wash the filters. The filter system is made of 3 parts. 5.
CAUTION! 3. To install the spray arm back, press it An incorrect position of the filters can downwards. cause bad washing results and damage to the appliance. 12.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
Page 27
3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out.
5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers.
Page 29
Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap. The display shows i30. • Make sure that the appliance is correctly installed. • Make sure the baskets are loaded as instructed in the user manual. Malfunction of the water level detec‐...
Page 30
Problem and alarm code Possible cause and solution Rattling or knocking sounds from • The tableware is not properly arranged in the baskets. Refer to basket the inside of the appliance. loading leaflet. • Make sure that the spray arms can rotate freely. The appliance trips the circuit-beak‐...
Page 31
13.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaf‐ let. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
Page 32
Problem Possible cause and solution Limescale deposits on the tableware, • The level of salt is low, check the refill indicator. on the tub and on the inside of the • The cap of the salt container is loose. door. •...
Problem Possible cause and solution The app cannot connect to the dish‐ • There is a trouble with the wireless network signal. Check your wire‐ washer. less network and router. Restart the router. • Check if your mobile device is connected to the network. •...
15. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol . Put the the household waste. Return the product to packaging in relevant containers to recycle it. your local recycling facility or contact your Help protect the environment and human municipal office.
Page 36
My Electrolux Kitchen app The software in this product contains components that are based on free and open source software. Electrolux gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://electrolux.opensoftwarerepository.com (folder NIUS)
Need help?
Do you have a question about the 700 Series and is the answer not in the manual?
Questions and answers