Table of Contents
Advertisement
INSTALLATION
Removing memory cards
• Do not remove the memory card while it is accessed. This could result in loss of
data.
1.To remove the card press lightly onto the upper edge until it ejects.
2.Pull the card out without touching the contacts.
3.Store the memory card in the packing or in another safe location.
• Memory cards are very fragile. Take care not to dirty the contacts and not to force
the card.
Accessing Memory Cards
• The appliance only supports memory cards in the FAT16/32 file format. If you insert
a card prepared with a different format (e.g. in cameras, MP3 players), your navigation
system may not recognize it and will ask you to format it again.
Warning: Formatting the memory card irretrievably wipes out all data.
• Likewise you cannot just copy files onto the memory card. In some cases they must
be converted by the Microsoft ActiveSync program.
Data Exchange VIA Card Reader
You can transfer or synchronise data via ActiveSync. This is also the correct method,
in particular, if files are to be transferred that must be converted into a navigation
system-readable format.
However, if you wish to copy large quantities of data (navigation maps) to the memory
card, these can also be stored directly to the memory card.
Many computers already have memory card devices. Insert the card in this and copy
the data directly to the card.
Because of the direct access significantly faster transfer will be achieved.
Resetting The Navigation System
There are two options for resetting the navigation system.
Soft Reset
This option restarts the navigation system, without reinstallation being necessary. A
soft-reset is often used in order to reorganize the memory. In doing so all programs
that are running are interrupted and the working memory is reinitialized.
Choose this option if your navigation system is not responding or working properly.
Perform the soft-reset as follows: Screw off the end cap of the pointer and carefully
press the point of the end cap into the reset opening on the left side of your device.
Hard Reset
Warning: A hard-reset deletes all data on your appliance and causes a new initial
installation. It is not necessary to install the software on your synchronization computer
again, however.
Perform the hard-reset as follows: Push the BATTERY ON/OFF switch on the bottom
of the device to the OFF position initially and back to ON after two seconds.
Safety Instructions for Navigation
The bundled product CD contains a comprehensive instruction manual.
Tips for Navigation
• Do not manipulate the navigation system while driving to protect yourself and others
from accidents!
• In the event that you do not understand the voice instruction or if you are in any
doubt about what to do at the next intersection, then the map or arrow display will
provide you with a quick orientation. Only look at the display when you are in a safe
driving situation!
• Attention: The road layout and driving rules take precedence over the instructions
7
Advertisement
Table of Contents
