LENCO NAV-400 Owner's Manual page 19

Global positioning system
Table of Contents

Advertisement

NAVIGATING A ROUTE
and speed. The icon indicates the
next item to be displayed.
Displays GPS status, such as
information about your satellite fix,
and the latitude, longitude and
altitude of your position. The icon
appears green when there is a GPS
fix, and red when there is no GPS fix.
Also provides a link to the GPS
Settings screen.
Displays battery status. When
the battery power is low, a message
box will appear.
Calculates a route to a pre-set
POI or address.
Lets you exit from the
Destinator OP application.
Menu Button
This button is shared by two
functions: Vehicle Mode (
Pedestrian Mode (
toggle between these two modes by
holding down this button for several
seconds. In Pedestrian Mode, the
navigation radius is restricted to 10
kilometres (6 miles).
Press the Menu Button to open
theDestination Menu. Pressing the
and
at the bottom of the screen allows
you to cycle between the Destination
Menu, the Options Menu and the
Settings Menu as seen in Figure
1-Menu structure
) and
). You can
3. The Destination Menu
At the map screen, press the
button to open the Destination menu.
buttons
19

Advertisement

Table of Contents
loading

Related Products for LENCO NAV-400

Table of Contents