LENCO NAV-400 Owner's Manual page 34

SETTING
Map Orientation
Forward is up – orients the map so
that your forward direction is always
at the top.
North is up – orients the map so that
north is always at the top.
Zoom Mechanism
Automatic Zoom – ensures that the
zoom will return to its previous level
after several seconds of inactivity.
Map Font
Use large labels
size of street names to make the
map easier to read.
Press the button to save your
selections and return to the map
screen.
7. Route Settings
The Route Settings screen lets you
choose the parameters for route
calculation.
Routing Mode
Navigation Mode – Provides voice
instructions as you drive.
This mode is the one you will use
most frequently. Destinator OP
uses the satellite-based global
positioning system (GPS) to
constantly detect your current
position. As you drive, your location
is compared to the destination you
have chosen and you will be
constantly provided with accurate
– increases the
driving directions. Even if you
accidentally drive
Destinator OP will direct you back on
track.
Planner Mode – Displays a route on
the map.
You set an origin and a destination,
and Destinator OP displays a map
that shows you the route. In this
mode of operation, the
satellite-based global positioning
system (GPS) is not used. Your
current position is not detected and
Destinator OP does not keep track of
your driving progress. Use Planner
Mode for trip planning.
34
course,