LENCO NAV-400 Owner's Manual page 50

FAVORITES IMPORTING
Loading Newly Created Maps to
the MO Device
(1) On the Destinator Console, to
refresh Standard Map dialog, Click
Tools > Refresh New Map Data.
(2) Select the map(s) you wish to
load by clicking on the map image or
selecting them from the list. (
represents a selected map to install.
(3) In Target device, click Change to
select where to install the map(s).
(4) Choose Storage Card, click OK.
Confirm that there is enough
memory to install map.
(5) Click
message requiring
appears.
(6)Press OK to load map. Destinator
Console will display a progress
window to let you monitor the
installation's progress.
(7)When the map installation has
completed, a Successfully loaded
message appears. Press OK.
Removing Map(s) from Memory
If you do not have Destinator
Console launched:
(1)Insert the Destinator Disk 1, into
the CD-ROM
computer,
launches the Destinator Console
)
(2)In Target device
select from where (which memory)
to remove map(s).
update the Installed Map Window.
(3)The
displays a list of all the loaded
maps available.
check box ( ) beside the map(s)
you wish to remove.
. A pop-up
Press the
(4)
confirmation
to remove the selected map.
(5) Destinator requires that you
confirm that you wish to remove
the selected map(s).
(6) Press Yes. The selected map(s) are
removed from memory.
Exit From Destinator Console
(1) If you need to exit the Destinator
Console, choose File > Exit .
You will need to confirm that you
want
Console .
(2) Press Yes and you will exit.
50
in your desktop
this automatically
click Change ,
This will
Installed Map Window
Click in the
button
to Exit the Destinator
.