Appendix C - Installing And Activating Additional Maps - LENCO NAV-400 Owner's Manual

FAVORITES IMPORTING
Appendix C
– Installing and
Activating Additional Maps
Where to Load map(s)
(1) From Target
Change to choose where to install
maps.
(2) In the Select Target Device dialog,
highlight Storage Card and click
OK.
The Target Device
displays the size of the map(s),
and the available room on the
storage card.
Select Maps to Load
(1) Select the map(s) you wish to
load by clicking on the map image
or selecting them from the list. (
represents a selected map to
install.
(2) Press the
button.
A Confirmation
displayed. Press the
to install the map(s), or the
Cancel button
installation and return to select
map(s). A status window will
indicate the progress of the map
installation.
(3)
When the map installation has completed,
a Successfully loaded message appears.
Press OK .
Activating Additional Maps
After
additional maps, they must be
activated before you can use them.
(1) Be sure your PC is connected to
(2) Be
Device press
(3) Start the Destinator program on
(4) From the toolbar at the top of the
window
(5) The Quick Activation screen
)
Dialog is
OK button
to exit map
51
you have installed
the Internet.
sure your MO
communicating with your PC via
Microsoft Active Sync.
your PC.
screen, select the
button.
appears. Click Next
continue.
the
is
to