Tech Controllers EU-M-12t User Manual page 12

CAUTION
The pre-set temperature can be set to within 15 minutes. In the event that the time intervals set by us overlap,
they will be highlighted in red. Such settings cannot be approved.
VI. CONTROLLER FUNCTIONS
Menu
3. OPERATION MODE
The function allows you to activate the selected operation mode in all controllers for all zones. The user has a choice of
normal, holiday, economy and comfort modes. The user can edit the factory mode values using the EU-M-12t panel or the
EU-L-12 and EU-ML-12 controllers.
3.1. NORMAL MODE
The pre-set temperature depends on the set schedule.
Menu → Zones → Master Module → Zone 1-8 → Operation Mode → Schedule... → Edit
3.2. HOLIDAY MODE
The pre-set temperature will depend on the settings of this mode.
Menu →Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Holiday Mode
3.3. ECONOMY MODE
The pre-set temperature will depend on the settings of this mode.
Menu → Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Economy Mode
3.4. COMFORT MODE
The pre-set temperature will depend on the settings of this mode.
Menu → Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Comfort Mode
CAUTION
•
Changing the mode to holiday, economy and comfort will apply to all zones. It is only possible to edit the setpoint
temperature of the selected mode for a particular zone.
•
In operation mode other than normal, it is not possible to change the pre-set temperature from the room controller
level.
Operation mode
Zones
Controller settings
Software update
Fitter's menu
Service menu
Factory settings
12