Page 1
Serial Number Decal MEMBER CARE For service at any time, go to my.iFIT.com or scan the QR code below. PLEASE DO NOT CONTACT THE STORE. CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this...
Page 2
PROFORM and IFIT are registered trademarks of iFIT Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google LLC. The Bluetooth word mark ®...
Page 3
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. IFIT assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM reading this manual, please see the front cover of this ® 225 CSX exercise bike. Cycling is an effective exercise manual. To help us assist you, note the product model for increasing cardiovascular fitness, building endur- number and serial number before contacting us (see ance, and toning the body.
Page 5
PART IDENTIFICATION CHART Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the key number is the quantity used for assembly.
Page 6
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 5. • Place all parts in a cleared area and remove the • Assembly can be completed using the included packing materials. Do not dispose of the packing tools.
Page 7
2. Using a standard screwdriver, carefully pry the Shield Cover (26) off the Left and Right Shields (37, 58). If there is a shipping tube (not shown) on the rear of the Frame (1), remove the screws from the shipping tube, and discard the screws and 37, 58 the shipping tube.
Page 8
4. Set the Seat Carriage (15) on the Seat Post (18) and hold it in place. Then, insert the Seat Knob (19) upward into the Seat Post (18), and tighten the Seat Knob into the Seat Bracket (14) inside of the Seat Carriage (15).
Page 9
6. Do not pinch the Main Wire (25). Orient the Upright (27) as shown, and hold it on the Frame (1). Attach the Upright (27) with four M8 x 20mm Screws (29); start all four Screws, and then tighten them. Do not pinch the Main Wire (25) 7.
Page 10
8. Orient the Shield Cover (26) as shown, and press it onto the Left and Right Shields (37, 58). 37, 58 9. See the inset drawing. Grip the connector on the Main Wire (25). Then, press the small latch (G) on the wire pull (F), and remove the wire pull.
Page 11
10. See the upper drawing. Hold the Console (7) near the Handlebar (4), and insert the console wire (J) through the indicated slot (K). See the lower drawing. Do not pinch the wires. Attach the Console (7) to the Handlebar (4) with four M6 x 16mm Screws (63);...
Page 12
12. Do not pinch the wires. Slide the Console Cover (3) onto the Handlebar (4), and then press the Console Cover onto the back of the Do not pinch Console (7). the wires 13. Identify the Right Pedal (60). Using your fingers, turn the Right Pedal about halfway into the Right Crank Arm (59).
Page 13
14. Plug the Power Adapter (30) into the receptacle on the front of the exercise bike. Note: To plug the Power Adapter (30) into an out- let, see page 14. 15. Make sure that all parts are properly tightened before you use the exercise bike. Extra parts may be included.
Page 14
HOW TO USE THE EXERCISE BIKE HOW TO PLUG IN THE POWER ADAPTER HOW TO ADJUST THE HEIGHT OF THE SEAT For effective exercise, the seat should be at the proper IMPORTANT: If the exercise bike has been exposed height. As you pedal, there should be a slight bend in to cold temperatures, allow it to warm to room tem- your knees when the pedals are in the lowest position.
Page 15
HOW TO USE THE CONSOLE With an iFIT subscription, you can access a large and FEATURES OF THE CONSOLE varied library of thousands of destination and studio The console offers a selection of features designed to workouts, create your own workouts, track your work- make your workouts more effective and enjoyable.
Page 16
Pulse (BPM and heart symbol)—Your heart rate HOW TO USE THE MANUAL MODE when you use a compatible heart rate monitor (see page 22). 1. Turn on the console. To turn on the console, press any button on the Resistance (RESIST)—The resistance level of the console or simply begin pedaling.
Page 17
You can also customize the scan mode to display 5. Pause or end the workout. only the desired workout information in the repeat- ing cycle. To pause the workout, simply stop pedaling. When the workout is paused, the time will flash in the display.
Page 18
4. Select an iFIT workout. The console offers access to a large and varied library In the iFIT app, touch the buttons at the bottom of of iFIT workouts when you download the iFIT app to the screen to select either the home screen (Home your smart device and connect it to the console.
Page 19
To disconnect your smart device from the console, first select the disconnect option in the iFIT app. Software Version Number—The software version Then, press and hold the iFIT Sync button on the number will appear in the display. console until the LED on the console turns solid green or the Bluetooth symbol disappears from the Unit of Measurement—The currently selected...
Page 20
Total Time—The word TIME will appear in the Demo Mode—The currently selected demo mode display. The display will show the total number of option will appear in the display. The console hours that the exercise bike has been used. features a demo mode, designed to be used if the exercise bike is displayed in a store.
Page 21
HOW TO USE THE CHARGING PORT HOW TO USE THE SOUND SYSTEM The console features a charging port to charge USB-C 1. Make sure that your device’s Bluetooth setting compatible devices, such as smartphones and tablets, is turned on, and hold your device near the while you exercise.
Page 22
HOW TO USE AN OPTIONAL HEART RATE To connect your Bluetooth Smart heart rate moni- tor to the console, press the iFIT Sync button on the MONITOR console; the console pairing number will appear in the Whether your goal display. When your heart rate monitor is connected, the is to burn fat or to LED on the console will flash red twice.
Page 23
Find the symptom that applies, and follow the steps listed. If further assistance is needed, go to my.iFIT.com, scan the QR code at the right, or call 1-833-680-IFIT (1-833-680-4348). CONSOLE TROUBLESHOOTING If the console does not turn on, make sure that the power adapter is fully plugged in.
Page 24
Using an M10 socket wrench with an extension (not HOW TO ADJUST THE DRIVE BELT included), reach into the opening in the bottom of the If you can feel the pedals slip while you are pedaling, Right Shield (58) and tighten the M10 x 50mm Screw even when the resistance is adjusted to the highest (49) a few turns until the Drive Belt (not shown) is tight;...
Page 25
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
Page 26
PART LIST Model No. PFEX32925.0 R0824A Key No. Qty. Description Key No. Qty. Description Frame Crank Nut M4 x 16mm Screw Left Crank Arm Console Cover M4 x 19mm Self-tapping Screw Handlebar Left Shield Handlebar Cap Snap Ring Wheel Bearing...
Page 27
EXPLODED DRAWING Model No. PFEX32925.0 R0824A...
Page 28
(5) if the product is modified to alter functionality or capability without the written permission of iFIT, or (6) if the product is used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by iFIT.
Need help?
Do you have a question about the PFEX32925.0 and is the answer not in the manual?
Questions and answers