Advertisement
Quick Links
Advertisement
Related Manuals for Alfa Network MODERNO 1P
Summary of Contents for Alfa Network MODERNO 1P
- Page 1 USER MANUAL QUICK GUIDE VERSION alfaforni.com...
- Page 2 JOIN ALFA USER MANUAL Register your oven product Download the complete user manual If you are here, it means that you have purchased an Alfa product and we would like to thank you for this. By choosing our product you are supporting the search and desire to bring good and healthy flame cooking in everybody’s life.
- Page 3 Index GENERAL WARNINGS SAFETY WARNINGS ASSEMBLY POSITIONING EXHAUST VENTILATION IGNITION MAINTENANCE AND CLEANING EXTRACTION OF THE BURNER MODERNO 2 & 3 PIZZE - CLASSICO 2 & 4 PIZZE MODERNO 1 & 5 PIZZE - FUTURO 2 & 4 PIZZE TROUBLESHOOTING PRESSURE REGULATORS WARRANTY...
- Page 4 GENERAL WARNINGS - When using the oven wear heat resistant oven gloves. WARNING: improper installation, adjustment, alteration, service or - The parts that are sealed by the manufacturer should not be modified by the user. maintenance can cause property damage, injury or death. - Do not block the openings and slots provided for ventilation and heat dissipation.
- Page 5 SAFETY WARNINGS FOR YOUR SAFETY • Do not install in prohibited areas. • Never touch the door or the chimney during use, as they are not insulated and become very hot during operation. • Do not store or use gasoline or other flammable vapors or liquids near this or any other appliance.
- Page 6 UNPACKING AND ASSEMBLY - Insert the supplied battery into the igniter. Unscrew the igniter button, insert the battery (E), then screw back the ignition button. Now when pressing - Remove the oven packaging. the button you will see and hear a Simply remove the plastic straps (A) small spark.
- Page 7 POSITIONING 50 cm 50 cm 20 in 20 in WARNING The external walls of the oven can reach temperatures exceeding 80°C; any flammable materials must not be within 1 meter of the oven. It is recommended to position the oven at a sufficient distance from flammable materials or materials that could be damaged by heat during use.
- Page 8 VENTING GUIDE WARNING: Major causes of vent related fires is failure to maintain required clearances (air spaces) to combustible materials. DO NOT CONNECT THIS TO A CHIMNEY FLUE Note: The outer walls of oven may reach high temperatures, more than 80°C SERVING ANOTHER APPLIANCE (176°F).
- Page 9 ALFA OVENS VENTING GUIDE FOR OVENS Basic guideline for ALFA Forni flue and obstruction clearances: VENTING SUPPORT • Single-wall flue pipe: allow 50 cm of clearance around the pipe. AND ASSISTANCE • Non-combustible clearance: a minimum of 100 cm is required below the ceiling.
- Page 10 LIGHTING THE OVEN WARNING: Follow the instructions before turning on the oven. • Check all gas connections before starting the oven. • For all threaded connections, use an appropriate PTFE gas pipe tape. • Do not lean over the oven when igniting it. Keep your face and body at a safe distance from the oven door.
- Page 11 CARE AND MAINTENANCE Clean the stainless steel parts. Alfa Forni ovens are made with stainless steel both inside and outside. To clean these parts, we recommend using a stainless steel cleaner. It is also advisable to carefully read the warnings and instructions on the detergent packaging. MAINTENANCE DIARY Do not use detergents containing acids, turpentine, or xylene.
- Page 12 EXTRACTION OF THE BURNER MODERNO 2 AND 3 PIZZE AND CLASSICO 2 AND 4 PIZZE 1 - Shut off the gas 2 - Remove the gas knob 7. Remove the burner Before starting, make sure the gas flow is To remove the gas knob (A), simply pull it by Complete the removal of the burner by pulling interrupted.
- Page 13 RESTORATION OF THE BURNER TIP: Before reassembling the burner and all its parts, ensure that the power cable is correctly connected by activating the button located at the front. NOTE: Reinsert the knob, paying attention to the valve pin. Apply slight pressure to push the knob into place.
- Page 14 EXTRACTION OF THE BURNER MODERNO 1 AND 5 PIZZE - FUTURO 2 AND 4 PIZZE 7. Remove the burner 1 - Shut off the gas 2 - Remove the gas knob Complete the removal of the burner by pulling it out completely. Before starting, make sure the gas flow is To remove the gas knob (A), simply pull it by interrupted.
- Page 15 RESTORATION OF THE BURNER TIP: Before reassembling the burner and all its parts, ensure that the power cable is correctly connected by activating the button located at the front. NOTE: Reinsert the knob, paying attention to the valve pin. Apply slight pressure to push the knob into place.
- Page 16 TROUBLESHOOTING GAS OVENS I AM NOT ABLE - Check if pressing the knob hits the exterior of the oven. If so, it is TO TURN ON possible that the gas valve is not opening properly. THE IGNITER DOES - Make sure the battery is new and the circuit is powered. NOT WORK CAN YOU PLACE THE OVENS...
- Page 17 30..50 20..25 network E RECOMMENDED FLOW RATE OF THE REGULATOR (only LPG and PROPANE) : 20 (from 2030) MODERNO 1P / MODERNO 2P / 1,5 kg/h POLAND CLASSICO 2P / FUTURO 2P PORTUGAL G56/G54/G52 MODERNO 3P / CLASSICO 4P /...
- Page 18 JOIN ALFA WARRANTY Register your oven product ALFA ovens are covered by a 24-month legal warranty against defects in conformity, at the expense of the If you are here, it means that you have purchased an Alfa product retailer. Proper maintenance and correct use of the and we would like to thank you for this.
- Page 19 alfaforni.com...
Need help?
Do you have a question about the MODERNO 1P and is the answer not in the manual?
Questions and answers