Config File - Tech Source RAPTOR 1100T - X11R6.1 FOR AIX Installation Manual

Other bit-depths can be selected in a similar manner.
NOTE: In the case when both methods to set bit-depth are used,
the STARSMODE variable takes precedence over the settings in the
TSIScreenConfig file.

4.3.1.2.2 Config File

The depth and resolution of the Raptor T-Class card can be set
using the /usr/X11R6.1/etc/TSIScreenConfig file. Each
row in the file corresponds to a specific Raptor T-Class card that is
identified by its device name. The fields in each row are separated
by spaces. In the sample config file shown below the bit-depth of
the Raptor 1100T (rap1kt0) card is set to 8+24. The cached
pixmap field is used for debugging purposes only and should
always be set to 1. The other fields are discussed in 4.3.2.
# device Depth
rap1kt0 8+24
The default visual in 8+24-bit mode is PseudoColor. In order to set
the default visual in the 8+24-bit mode to TrueColor, the X Server
should be started with command line option cc set to 4. The
example below shows how to set the default visual to TrueColor for
the card rap2kt0.
#xinit -- $X11R6HOME/bin/Xtsi –Pll rap2kt0 –cc 4
NOTE: This method of setting the default visual has an effect only
in the 8+24-bit mode.
Chapter 4 - Invoking X11R6.1
Resolution Sync Cached Resfile
DEFAULT 1
4-5
pixmap
1 trzresinfo