4.
Insert the CD-ROM labeled "Raptor X11R6.1 for AIX" into
the CD-ROM drive.
5.
Mount the CD-ROM drive. To do this using SMIT, perform
the following steps:
•
Select System Storage Management | File
Systems | Mount a File System
•
In the File System Name box, select /dev/cd0
(or the location of your CD-ROM device)
•
In the Directory to Mount box, select /cdrom
•
In the Type of File System box, select cdrfs
•
In the Mount as READ-ONLY file system box,
select yes.
6.
Install the software. To do this using SMIT, perform the
following steps:
•
Select Software Installation and Maintenance |
Install and Update Software
•
Install Software
•
In the Input Device/Directory for Software box,
select the appropriate directory below based on
the type of the system you use:
For 43P and 44P machines:
•
/cdrom/power3
For IntelliStation Power 275:
•
/cdrom/power4
•
In the Software to Install box, make sure it says
"_all_latest".
Raptor X11R6.1 for AIX Installation Manual
3-2
Need help?
Do you have a question about the RAPTOR 1100T - X11R6.1 FOR AIX and is the answer not in the manual?