Table of Contents
Advertisement
Raptor X11R6.1 for Solaris Installation Manual
The Raptor 2500T card has one connector on the front bracket.
One side of the provided cable has the LFH60 connector that
connects to the graphics card. The cable splits into two with
MDR26 connectors on the opposite end. These two connectors
marked A & B get connected to the appropriately marked
connectors on the back of the digital flat panel. They are shown in
Figure 2-1.
Figure 2-1 – 2500 FPS Digital Flat Panel Subsystem
2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the RAPTOR 1100T - X11R6.1 FOR AIX and is the answer not in the manual?