Tech Source RAPTOR 1100T - X11R6.1 FOR AIX Installation Manual page 18

Raptor X11R6.1 for AIX Installation Manual
If no specific client program is given on the command line, xinit
will look for a file in the user's home directory called .xinitrc to
run as a shell script to start up client programs. If no such file
exists, xinit will use the following as a default:
xterm -geometry +1+1 -n login -display :0
If no specific server program is given on the command line, xinit
will look for a file in the user's home directory called .xserverrc
to run as a shell script to start up the server. If no such file exists,
xinit will use the following as a default:
X :0
Note that this assumes that there is a program named X in the
current search path. The X11R6.1 server in this software is called
Xtsi and is in the directory $X11R6HOME/bin. A symbolic link
has been made from X to Xtsi.
To startup the server using xinit, type:
prompt% xinit -- $X11R6HOME/bin/Xtsi -P11
rap2kt0
You may add any other command line arguments to the end of the
line. For additional information on xinit, refer to the xinit man
page.
The X server can run in multi-screen mode. The example below
shows how to start on Raptor 2100T and Raptor 1100T:
prompt% xinit -- $X11R6HOME/bin/Xtsi –P11 rap2kt0
–P12 rap1kt0
NOTE: The Raptor 2000 and Raptor 200-12M cards cannot be
used in multi-screen configurations.
4-2