Bowflex Max Trainer M3 Troubleshooting Manual

3/11/24, 8:35 AM
Max Trainer M3: Why is there no power to my machine or console?
Follow this troubleshooting guide to help resolve power and console issues on the Max Trainer M3.
Some common complaints may include:
No power
Console display never turns on
Console display only turns on partially
Important: Many power issues can be resolved by reconnecting the power cord. Before beginning troubleshooting, unplug both
ends of the power cord and plug it back in. Make sure the power cord is plugged in all the way.
Follow these steps to troubleshoot the issue
Tools you may need:
Phillips head screwdriver
Voltmeter
1.
Unplug the power adapter from both ends. Inspect the entire cord for any visible wires, cuts, breaks, or crimps. Verify
that the power adapter end is not broken and that there is no damage to the power plug wire inlet (reference 1.1). If
there is damage to the end of the power
there is only damage to the power cord
This image provides an example of damage to the power adapter end and the power plug wire inlet.
2.
Test the wall power outlet that your machine uses with another device, such as a lamp, to ensure it is working. If the
power outlet does not provide power to the new device, try plugging your machine into another outlet and powering
on [11010.C].
3.
Plug the power adapter back into the wall outlet and the machine. Watch the console to see if it turns on, even
partially. If the console partially lights up, please
partially? to continue troubleshooting.
about:blank
Max Trainer M3:  Why is there no power to my machine or console?
adapter, order a Power Adapter and a Power Plug Wire
portion, order a Power
(Reference 1.1)
visit Max Trainer M3, M5: Why does the console only light up
Adapter [11010.B].
ID: 11010.1
Inlet [11010.A]. I
1/5