Bowflex Max Trainer M7 Troubleshooting Manual page 2

3/11/24, 8:41 AM
6.
Tighten both crank nuts as much as possible using a 14mm socket wrench, then test if the noise persists [11003.H].
7.
If the noise persists, refer to the
side they were originally located on and reinstall. Test to determine if the noise persists [11003.E].
8.
If the noise persists, but the noise followed the pedal arm after swapping its location,
Arm [11003.F].
9.
If the noise persists from the original location,
Important: a crank puller is required to replace the crank. If you do not already own one,
Puller as well.
Need to order replacement parts?
1 Customer Care Contact Information
Please contact Customer Care at
Some replacement parts may also be available for purchase
A list of part numbers referenced within this guide can be located at the bottom of this page.
Customer Care - Hours of Operation:
Monday - Friday 6:00am - 5:00pm PST
The replacement part will be provided to you at no cost assuming your machine meets the warranty eligibility
requirements. A Customer Care Agent will be able to assess your current warranty eligibility and provide you with your
options.
Please note that if you did not purchase your machine directly from BowFlex, Schwinn, or Nautilus, we will need a copy
of your purchase receipt in order to register your machine for warranty.
2 Parts Reference Table
Part Description
Crank Assembly, Left
Crank Assembly, Right
Crank Puller
Roller Wheel
Roller Wheel Washer Kit
Upper Foot Pedal Arm
3 Contact Tech Team / Advanced Troubleshooting
If the issue was not resolved in the steps listed, contact the Tech Team or send an Advanced Troubleshooting
case.
with
Submit a Case case
about:blank
Max Trainer M7:  Roller Wheel and Pedal Arm Issues
assembly manual
1-800-605-3369
type Advanced Troubleshooting
to remove the pedal arms. Swap the pedal arms to the opposite
order a Crank Assembly for the affected
for additional help or to order replacement parts.
online here.
Part SKU
8013009
8013008
74025
8004550
8010649
8007501
order an Upper Foot Pedal
side [11003.G].
order a Crank
2/2