Bowflex Max Trainer M7 Troubleshooting Manual

3/11/24, 8:44 AM
Max Trainer M7: Why is there no power to my machine or console?
Follow this troubleshooting guide to help resolve power and console issues on the Max Trainer M7.
Some common complaints may include:
No power
Console display never turns on
Console display only turns on partially
Important: Many power issues can be resolved by reconnecting the power cord. Before beginning troubleshooting, unplug both
ends of the power cord and plug it back in. Make sure the power cord is properly plugged in all the way.
Follow these steps to troubleshoot the issue
Tools you may need:
5mm hex/Allen wrench, or the wrench from the hardware
card included with your machine
Phillips head screwdriver
14mm socket wrench, or the wrench from the hardware card
included with your machine
1.
Unplug the power adapter from both ends. Inspect the entire cord for any visible wires, cuts, breaks, or crimps. Verify
that the power adapter end is not broken and that there is no damage to the power plug wire inlet (reference 1). If
there is damage to the end of the power
of the damaged components [11016.A]. If there is only damage to the power cord
Adapter and dispose of the damaged component [11016.B].
This image provides an example of damage to the power adapter end and the power plug wire inlet.
2.
Test the wall power outlet that your machine uses with another device, such as a lamp, to ensure it is working. If the
power outlet does not work for the new device, try plugging your machine into another outlet and powering
on [11016.C].
about:blank
Max Trainer M7:  Why is there no power to my machine or console?
adapter, order a Power Adapter and a Power Plug Wire
(Reference 1)
ID: 11016.1
Inlet and dispose
portion, order a Power
1/5