Bowflex HVT Troubleshooting Manual

5/22/24, 1:33 PM
BowFlex HVT: Why are the power and/or calorie readings incorrect
on the console?
Follow this troubleshooting guide to help resolve issues with the power and calorie readings on the BowFlex HVT.
Some common complaints may include:
Power is not registering on console
Calories do not show up on console
Power and/or calorie readings are incorrect
Follow these steps to troubleshoot the issue
Tools you may need:
Phillips head screwdriver
Flathead screwdriver
6mm hex/Allen wrench, or the wrench from the
hardware card included with your machine
1.
Inspect the speed sensor for damage. Unplug your machine from power and remove the lower rear cover
(reference 1) using a Phillips head screwdriver. The power inlet wire must be unplugged prior to fully
removing the cover. Once the cover is removed, locate the speed sensor (reference 2). Inspect the speed
sensor and cable for damage. Unplug the speed sensor cable and firmly plug it back in. Test to see if the issue
persists [13328.A]. If the speed sensor is damaged or the issue persists after reseating the cable,
Speed Sensor Assembly [13328.B].
about:blank
BowFlex HVT:  Why are the power and/or calorie readings incorrect on the console?
(Reference 1)
ID: 13328.1
order a
1/3