Chapter 3 Connecting Cables; Connecting Peripheral Usb Devices - Eizo FLEXSCAN SX3031W User Manual

Chapter 3 Connecting Cables

3-1 Connecting Peripheral USB Devices

This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
●
Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to a USB
compatible PC
(2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later
(3) EIZO USB cable (MD-C93)
●
Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run the PC.
(2) Connect the supplied USB cable between the downstream USB port of a
USB compatible PC (or another USB hub) and the monitor's upstream USB
port.
(3) When the USB function setup is completed, the monitor functions as a USB
hub allowing connection to various peripheral USB devices through its
downstream USB ports.
Upstream
Downstream
The USB function is set up automatically upon connection of the USB cable.
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the monitor is in the power saving
mode, or if the monitor is connected
to the power outlet with the monitor
turned off, all the devices connected
to the USB ports (upstream and
downstream) work. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.
Chapter 3 Connecting Cables
17