Eizo eClient SX1 User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. eClient SX1
  6. User manual
Eizo eClient SX1 User Manual

Eizo eClient SX1 User Manual

Stand type windows-based terminal
Hide thumbs Also See for eClient SX1:
Table of Contents

Advertisement

Quick Links

Download this manual
Please confirm the version of the software built in eClient, and refer to
the suited User's Manual (Refer to the User's Manual Version List on
next page).
This is the manual for the following software version.
* Microsoft Windows XP Embedded: Ver. 5.01 or later, Rev. 1.0.2 or later
* Microsoft Remote Desktop Connection Software: Ver. 5.2.3 or later
* Ctrix ICA Client Software: Ver. 8.0 or later
- For Administrator -
For Microsoft Windows XP Embedded
Version A

Advertisement

Table of Contents
loading

Related Manuals for Eizo eClient SX1

Summary of Contents for Eizo eClient SX1

  • Page 1 Please confirm the version of the software built in eClient, and refer to the suited User's Manual (Refer to the User's Manual Version List on next page). This is the manual for the following software version. * Microsoft Windows XP Embedded: Ver. 5.01 or later, Rev. 1.0.2 or later * Microsoft Remote Desktop Connection Software: Ver.
  • Page 2 User’s Manual Version List A handling description changes with versions of the software built in eClient. Please refer to below. NOTE • The version of software built in eClient can be checked with a [System] tab of [Start]- [About] menu. Microsoft Windows XP Embedded Software Microsoft Remote...

  • Page 3: Safety Symbols

    Indicates a prohibited action. Indicates to ground for safety. Copyright© 2004 EIZO NANAO CORPORATION. All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

  • Page 4: Table Of Contents

    1-1. General Description ...5 1-2. Features ...5 1-3. Package Contents...6 1-4. Controllers & Connectors ...7 2. CONNECTION the eClient SX1 ... 9 2-1. Setting up the SX1 ...9 3. OPERATION ... 15 3-1. Adding a Connection name...15 3-2. Logging on or off the WTS ...20 3-3.Opening/Closing the Local Web Browser...24...

  • Page 5: Introduction

    1. INTRODUCTION Thank you very much for purchasing the EIZO eClient SX1. 1-1. General Description The SX1 is used as a thin client, which connects to the terminal service installed Windows Terminal Server (Hereafter defined WTS) as listed below and accesses applications or data provided from the WTS.

  • Page 6: Package Contents

    NOTE • A keyboard is not included. It must be purchased separately. • Please use the enclosed mouse. EIZO NANAO CORPORATION will no be held responsible for accident or damage caused by the use of a mouse manufactured by other companies.

  • Page 7: Controllers & Connectors

    1-4. Controllers & Connectors Controllers Left View (1) Power Button (2) Power Indicator Power Indicator Blue [Procedure to return to the operation mode] - Operate the mouse or keyboard. The monitor is in the power save mode when the power save function of the monitor is set.
  • Page 8 Connectors (1) Power Supply Control Switch (POWER SYNC)…Same with (5) on P.7 (2) Power Connector (AC output) (3) Power Connector (AC input) (4) Ethernet Connector (10 Base-T, 100 Base-TX) (5) Parallel Connector (6) Headphone Connector Microphone Connector (7) PC Card Slot (8) USB Port (Downstream) x 2 (9) DVI-I Output Connector (10) Serial Port (RS-232C)

  • Page 9: Connection The Eclient Sx1

    Please observe the following cautions when connecting the SX1. WARNING Place the eClient SX1 on a strong, stable surface. A unit placed on an inadequate surface may fall, resulting in injury or equipment damage. If the unit falls, disconnect the power immediately and have the unit checked by a qualified service engineer before using it again.
  • Page 10 Mounting EIZO monitor to the SX1 When using other monitors than EIZO, proceed to step 3. The Monitor Attachment Unit of SX1 supports the EIZO L767, L567, L557, and L367, so EIZO monitor mounted SX1 is available. NOTE • Prepare the following, when mounting a monitor to the SX1.
  • Page 11 (2) Grip both side of the monitor firmly with both hands and adjust the monitor angle as desired. 100 mm x 100 mm for L567/L557/L767 75 mm x 75 mm for L367 Knob position Middle position 2. CONNECTION the eClient SX1 Highest position Lowest position...
  • Page 12 When the power button of SC1/SX1 is turned on or off… Power Supply Control Switch (POWER SYNC) OFF (default) 2. CONNECTION the eClient SX1 Power supply for the monitor The monitor’s power supply is linked, and it turns on or off simultaneously.
  • Page 13 • Please remove the lid on the side of the SX1 before connecting a LAN card or a modem card. Plug a keyboard and a mouse into the SX1. When using other devices, connect them to the appropriate connectors. 2. CONNECTION the eClient SX1...
  • Page 14 Analog Output 640 x 480 @60 Hz 800 x 600 @60 Hz 1024 x 768 @60 Hz 1280 x 1024 @60 Hz 2. CONNECTION the eClient SX1 Digital Output 16 bbp 640 x 480 @60 Hz 32 bbp 16 bbp...

  • Page 15: Operation

    3. OPERATION This chapter shows how to start and end SC1/SX1 operation. 3-1. Adding a Connection name When using the RDP protocol Turn on the SX1. The Desktop screen will be displayed. Star the [Remote Desktop Connection]. Double click the [Remote Desktop Connection] icon to open the [Remote Desktop Connection] dialog box.
  • Page 16 Set up connection settings of each setting tab of [Options] with reference to the setting method of Windows. Name the file name and save it. (1) Click [Save As] of [Connection settings] of the [General] tab. (2) Name the file (The example is “RDP1.rdp”.), and save it. 3.
  • Page 17 A new icon (The example is “RDP1”) is displayed on the desktop. If a setup finishes, click [Connect] and log on to the WTS, or click [Close] and end a setup. 3. OPERATION...
  • Page 18 When using the ICA protocol Turn on the eClient SX1. The Desktop screen will be displayed. Double click the [Citrix Program Neighborhood] icon to open the Citrix program. Click [Start]-[Citrix Program Neighborhood] to open the Citrix program. Click [Start]-[Program]-[Citrix]-[MetaFrame Access Clients]-[Program Neighborhood] to open the Citrix program.
  • Page 19 “Add New ICA Connection” Wizard is displayed. Set up the SX1 according to the directions of the displayed dialog box. The last page of the wizard is displayed and click [Finish], a new icon (The example is “ICA1”) is added in the “Citrix Program Neighborhood-Custom ICA Connections”...

  • Page 20: Logging On Or Off The Wts

    3-2. Logging on or off the WTS Logging on to the WTS Turn on the SX1. The Desktop screen will be displayed. When using the RDP protocol, proceed to step 3, and when using the ICA protocol, proceed to step 4. When using the RDP protocol In case the connection icon exists on the desktop (1) Double click the connection icon (The example below is “RDP1”.).
  • Page 21 (2) Double click the [Remote Desktop Connection] icon to open the [Remote Desktop Connection] dialog box. Click [Start]-[Remote Desktop Connection] to open the [Remote Desktop Connection] dialog box. Click [Start]-[Program]-[Remote Desktop Connection] to open the [Remote Desktop Connection] dialog box. (3) The [Remote Desktop Connection] will be displayed.
  • Page 22 (5) The [Citrix Program Neighborhood] will be displayed. Double click the connection icon (The example below is “ICA1”). When the SX1 connects to the WTS, the “Log On to Windows” dialog box is displayed. Enter your [User name] and [Password], and then click [OK] to log on to the WTS. After logging on, the SX1 allows you to use the Microsoft Windows applications running on the WTS.
  • Page 23 Logging off the WTS If your SX1 starts its operation with a desktop: Log off the WTS. (1) Close all the applications. (2) Select [Start] on the taskbar. (3) Select [Shut Down...] and select [Logoff] of the [Shut Down Windows] dialog box. (4) Click [OK] on the Logoff Window.

  • Page 24: 3-3.Opening/Closing The Local Web Browser

    3-3.Opening/Closing the Local Web Browser Opening the Local Web Browser Turn on the SX1. The desktop screen will be displayed. Double click the [Internet Explorer] icon to open the browser. Click [Start]-[Internet Explorer] to open the browser. Click [Start]-[Program]-[Internet Explorer] to open the browser. The local web browser opens.

  • Page 25: Setup The Environment Of The Operation

    Please note the followings as the system information of SX1. Windows update • Do not perform the “Windows Update” on the SX1. Perform the security updating by using the firmware, which EIZO will submit. Local Browser • The SX1 incorporates “Microsoft Internet Explorer 6.0”.

  • Page 26: Log On To The Sx1 As The System Administrator

    Power save setting • Do not use [System standby] setting on the power scheme setting of the control panel, since the connection with WTS is disconnected when the SX1 shift to system standby. When the SX1 is used again, you should reconnect to the WTS (Refer to P.35). 4-2.
  • Page 27 Log off the SX1 as the “User” authority and log on it as the “Administrator” authority. (1) Click [Start] and select [Shut Down…] and select [Log off User] of the [[Shut down Windows]. (2) Click [OK] by pressing the [Shift] key on the keyboard. (3) The [Log On to Windows] is displayed on the screen, appears, enter “Administrator”...

  • Page 28: User" Authority And "Administrator" Authority

    4-3. “User” authority and “Administrator” authority The operation, which can be operated by the “Administrator“ authority is different from the “User” authority. For the detailed setting as the “Administrator” authority for the “Control panel” and [Start]-[About] menu, please refer to “4-4. Using the control panel”...
  • Page 29 [Start]-[About] menu The information about eClient is displayed. For details, please refer to "4-5. [Start]- [About] menu" Administrator User 4. Setup the environment of the operation (by the System Administrator) [General] [Security] √ √ √ [System] √ √...

  • Page 30: Using The Control Panel

    4-4. Using the control panel Each function of the Control panel and the [About] menu perform various setup of SX1. Log on and set up by “Administrator” authority. About each function of a control panel, it is the standard function of Windows. In this section, we explain only functions, which we add to use them for SX1.
  • Page 31 Control panel items Icon Accessibility Options Add Hardware Add or Remove Programs Administrative Tools /only ”Enhanced Write Filter” is EIZO original Date and Time Display Folder Options Fonts Internet Options Java Plug-in Keyboard Mouse Network Connections Phone and Modem Options...
  • Page 32 Terminal Logon By enabling the automatic logon, it logs automatically by the user name at the time of starting (i.e. power supply ON). Set up a user name and a password. [Enable auto logon to terminal] ...Enable or disable of the automatic logon function to [User settings] ...An effective user name, a password, and a domain When logging on by user name which is different in the name of automatic logon...
  • Page 33 RAM Disk The size of a RAM disk drive is set up. This RAM disk is volatile disk, and is used as temporary data storage. Drive letter “Z:” is assigned to the RAM disk. [RAM Disk Settings] ...The current RAM disk drive is displayed. Moreover, The following items are stored on the RAM disk.
  • Page 34 Administrative Tools-Enhanced Write Filter Control Enhanced Write Filter (EWF) forbids the unnecessary writing to Flash Memory (C: drive) where software (OS, application, user setup) is saved, and improves the security and robustness of SX1. NOTE • In order to prevent the unusual writing to Flash Memory (C: drive), when usually using the SX1, be sure to use EWF in the state of enable (writing the Flash Memory (C: drive) is prohibited).
  • Page 35 Display- [Screen Saver] tab A connection monitor's Screen Saver and a setup of power-saving control are [Control Panel]-[Display]-[Screen Saver] tab and set up them by this tab. A power- saving control setup of the SX1 should use [Turn off monitor]. NOTE •...
  • Page 36 Power saving [Monitor Power] [Power Schemes] tab-[Turn off monitor] ...Set the screen saver pattern, waiting time (for NOTE • Set the power save setting of the connection monitor. Power Control system SX1 setting Screen Saver Turn off monitor System Standby (Do not set this.) 4.

  • Page 37: Start]-[About] Menu

    4-5. [Start]-[About] menu The [Start]-[About] menu of Windows shows the SX1 information and performs an IP address setup of the management console for software Network Administrator Version 3.0 which manages the client terminals. General [General] tab shows the product name, Product ID, Windows XPe Revision, version, Build No.

  • Page 38: Software Updating/Installation

    System [System] tab shows the product information. [Software] ...Microsoft Windows XPe Version, Revision, Build [Hardware] ...Serial number of the SX1 [Network] ...Network information 4-6. Software updating/Installation The software backup and update of SX1 is performed using thin client utility software “Network Administrator”.

  • Page 39: Troubleshooting

    5. TROUBLESHOOTING This page presents problem that can be corrected by the user. If a problem persists even after applying the suggested remedies, contact an EIZO dealer. Problems 1. No picture is displayed on the screen (The power indicator is off).

  • Page 40: Cleaning

    6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet.

  • Page 41: Specifications

    7. SPECIFICATIONS CPU and Memory Memory Display Color Supported Resolution Complying Protocol Software Complying Software for Windows Terminal Server Mouse Power Supply Power Consumption (without AC outlet connection) Interface Connector Keyboard, Mouse USB Port Parallel Serial Port PC Card Slot Line Output Monaural Microphone...
  • Page 42 Dimensions (eClient only) Dimensions (EIZO monitor attached) Monitor Mount Position Model L367 L557/L567 L767 * The figure is the size in case the monitor is installed perpendicularly. L367 7. SPECIFICATIONS 200(7.9) Highest Middle 326 x 383 x 216 326 x 355 x 232...
  • Page 43 L557/L567 L767 7. SPECIFICATIONS...

This manual is also suitable for:

Eclient sx1 - administrator's manuals

Table of Contents