Chapter 1 Features And Overview; Features; Buttons And Indicators - Eizo FLEXSCAN SX3031W User Manual

Chapter 1 Features and Overview

Thank you very much for choosing an EIZO color LCD monitor.

1-1 Features

• 29.8 inch class wide screen format LCD
• WQXGA (2560 × 1600) display compliant (SIGNAL1)
• HDCP signal (SIGNAL2) compliant
• Dual-display compliant by introducing dual-input system (DVI-D × 2
connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency: 31 - 100 kHz
• Vertical scan frequency:
• Resolution:
• Compatible with frame synchronization mode (59 - 61 Hz)
• Portrait/Landscape display available (rotate 90 degrees clockwise)
• Smoothing (soft - sharp) function
• FineContrast mode to allow the best mode for screen display
• The utility software "ScreenManager Pro for LCD" (for Windows) to control
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).

1-2 Buttons and Indicators

Buttons
1. Input signal selection button
2. Mode button
3. Enter button
4. Control buttons (Left, Down, Up, Right)
5. Power button
6. Power indicator
Indicator status
Blue The screen is displayed
Orange Power saving
Off Power off
®
* ScreenManager is an EIZO's nickname of the Adjustment menu.
59 - 61 Hz (VGA TEXT: 69 - 71 Hz)
2560 dots × 1600 lines
Adjustment menu (*ScreenManager
Operation status
NOTE
• This monitor supports the Portrait/
Landscape display. This function
allows you to change the orientation
of the Adjustment menu when using
the monitor screen in vertical display
position. (Refer to "2-9 Setting
Orientation" on page 14.)
• If you use the monitor with "Portrait"
position, the setting may be required
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.
®
)
NOTE
• While the screen is displayed, the
blue power indicator that is lighting
blue can be turned off (see "To turn
off the Power indicator while a screen
is displayed [Power Indicator]" on
page 12).
• For the power indicator status with
"Off Timer" set, refer to "To set
monitor power-off time [Off Timer]"
on page 10.
Chapter 1 Features and Overview
3