TSI Quest SoundPro SE Series Manual

SoundPro
Level Meters
Series SE/DL
Adding Options via SanDisk (SD) Memory Card
You recently ordered options for your SoundPro™ Sound Level Meter
Model SE/DL provided to you on an SD memory card.
The options SD card, labeled with a serial number, will only install to the matching serial number on the
SoundPro Sound Level Meter Model SE/DL. (The SoundPro™ meter's serial number is located on a
back label.)
Follow the steps below to add the Sound Level Meter (SLM) options.
1. Ensure you have the latest firmware version and DMS software.
2. To download the latest SoundPro Sound Level Meter Model SE/DL firmware:
Open DMS software.
◼
Navigate to SoundPro instrument.
◼
Select Setup.
◼
In the Setup window, select Options and click on the Updates tab.
◼
In the Updates screen select TSI | Quest web server.
◼
Select the Update button
◼
(when the SoundPro meter is
connected to your computer).
Follow screen prompts. At
◼
the end, it will state if it was
loaded properly.
3. Insert the options SD card
®
provided by TSI Incorporated,
into the memory card slot
(see diagram).
4. Press On/Off/Esc key to power on the SoundPro Sound Level Meter.
www.tsi.com
™
Sound
NOTICE