Delfield
™
®
UC4532N Undercounter
Front-Breathing Undercounter Freezers
Models
•
UC4532N
Single section freezer undercounter with a door
•
UCD4532N
Single section freezer undercounter with drawers
UCD4532N
Specifications
Exterior top is one-piece, 22-gauge stainless steel with
integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge galvanized
steel.
Exterior ends are stainless steel.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel.
Interior bottom and top
are thermoformed ABS plastic. Base is fully insulated with
high-density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and condensate evaporator
mounted on rear of the cabinet. Evaporator coil are located
on the interior rear wall of the cabinet. Refrigerant flow is
controlled by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Standard Features
•
100% front breathing, which allows the unit to be
pushed against a wall or built into a cabinet or an
existing line up
•
Durable, rugged stainless steel sides, top and
front
•
Features Delfield's exclusive ABS interior (on sides).
ABS is extremely durable - it won't dent, chip
or corrode and is backed by a limited lifetime
warranty
•
Heavy duty self-closing hinges
•
"D" prefix models feature Delfield's exclusive new
drawer system. Drawers are backed by a 10-year
warranty on the track assembly
•
Environmentally friendly R404A refrigerant
•
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
•
Black recessed quick grip handle
•
Standard on 2" casters for easy cleaning and
installation
•
60-cycle single phase electrical system
•
7' cord and plug supplied
•
Cord spring relief - prevents cord rollover
•
One epoxy coated wire shelf standard, installed
per door section
•
ACT solid state electronic control
•
One year parts and 90 day labor standard
warranty.
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit has a 7' (2.1m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 2" (5.08cm) diameter front
locking plate casters. 2.5" (6.35cm) ride height.
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers have a 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Drawer units have two drawers. Top
drawer holds two 12" x 20" (30.5cm x 50.8cm x 10.1cm) 4"-6"
deep pans. Bottom drawer holds one 12" x 20" and three 1/6
size 4" deep pans. Pans are supplied by others.
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
www.delfield.com
Options &
Accessories
•
Flat lift off cover
•
18" wide single tier overshelf
•
Stainless steel finish on back
•
Plastic laminate on front
•
Additional wire shelves
•
Door lock
•
Exterior thermometer
•
Interior lights
•
Glass door(s)
•
*220V/50 Hertz electrical
system
* Inclusion of this option will
alter electrical specifications
of the unit.