Delfield
™
®
Specification Line®
Self-Contained Glass Door Reach-In Freezer
Models
One section
Two section
Three section
SSF1-G
SSF2-G
SSF3-G
SSF1-GH
SSF2-GH
SSF3-GH
SAF1-G
SAF2-G
SAF3-G
SAF1-GH
SAF2-GH
SAF3-GH
SMF1-G
SMF2-G
SMF3-G
SMF1-GH
SMF2-GH
SMF3-GH
SSF2-G
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel
exterior cabinet sides, front and shroud. SM models shall have corrosion
resistant aluminum on exterior cabinet sides and will have stainless front
and shroud. All units shall have the upper shroud hinged with a gas assist
stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS
models) or heavy gauge aluminum (SA and SM models). Bottom and top
surfaces shall be die stamped to provide radius corners and recessed floor.
Three wire shelves are provided per section, SA/SS standard shelves are
chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips
which are adjustable on 1" increments on stainless steel pilasters affixed
to the cabinet interior. Pilasters are removable without tools for cleaning.
Mounted to the interior ceiling, the interior fluorescent light is controlled
automatically through a switch mounted in the hinge assembly to protect
against breakage. Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
edgemount, self-closing, cam lift style hinges. Doors can be removed from
the cabinet without the use of tools. Door handle is continuous along
vertical dimension of the door. Door gaskets are magnetic and mount to
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Stainless exterior and interior glass full door
Stainless exterior and interior glass half door
Stainless exterior and aluminum interior glass full door
Stainless exterior and aluminum interior glass half door
Stainless front aluminum exterior and interior glass full door
Stainless front aluminum exterior and interior glass half door
Standard Features
•
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior (SA)
•
Aluminum interior and exterior, stainless front
(SM)
•
Built in door locks with heavy duty strikes
•
Pressure relief valve is standard to prevent door
vapor lock
•
Exterior digital thermometer with high/low
temperature alarm
•
Easy to use electronic control
•
Easy access "flip up" shroud
•
Three wire shelves per section - SA/SS standard
with chrome plated shelves and SM standard
with epoxy coated shelves
•
10' attached cord and plug on 115V units
•
6" adjustable stainless steel legs
•
Stainless steel breaker strips
•
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
•
Energy savings door heater switch
•
Two year parts & labor warranty
•
Five year compressor warranty
the door, snapping in place and removable with out tools. Keyed door lock
is mounted to the door. Lock engages into a heavy duty strike mounted to
the cabinet face.
Refrigeration system: All components are mounted to the exterior of the
cabinet ceiling, outside the food zone and are assembled as one piece and
can be removed as one piece. Environmentally friendly R404A refrigerant
is used. The system has the capability of maintaining between -5ºF and
0ºF in heavy use food service operations. Refrigerant is metered using
a highly responsive thermostatic expansion valve. System is controlled
using Delfield's ACT-Advanced Control Technology electronic temperature
control, which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum efficiency. Evaporator condensate is
eliminated using an energy efficient hot gas system.
Electrical: Standard electrical on one section units shall be 115V, 60 Hz
single phase. A 10' cord and plug is supplied and attached to a junction box
mounted on the exterior top of the cabinet. Two and three section units
shall be 115/208-230 and will require hardwire connections.
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
www.delfield.com
Options &
Accessories
•
Security (prison) package
•
6" polyurethane casters
•
Incandescent light
•
Door field rehingability
•
Additional shelves
•
Tray slides
•
Stainless steel back
•
Laminate on front, sides and back
•
Bottom mount electrical
•
Stainless steel banking strip
•
Heat shield end
•
Stainless steel kick plate
•
Laminate kick plate
•
4" stainless steel utility base
•
230-50-1 electrical
•
220-60-1 electrical