Side Panel - Sony FWD-50PX3 Operating Instructions Manual

Side Panel

Connector
1 REMOTE
(10BASE-T/100BASE-TX)
2 AUDIO OUT L/R
(RCA pin jack)
8
GB
Description
Serves to connect the display to a network, using a 10BASE-T/100BASE-TX LAN cable.
You can assign various settings and control the display via the network from a PC.
Caution
For safety, do not connect the connector for peripheral device wiring that might have
excessive voltage to this port. Follow the instructions for this port.
Note
When using this connector, select "Display" in "Network Port". (page 30)
Outputs an audio of the signal currently indicated on the screen. Outputs an audio signal
corresponding to the active* picture while in the "P&P" or "PinP" mode.
Note
Settings assigned in "Sound Mode" will not be reflected.
OPTION 1 slot
(VIDEO/COM)
OPTION 2 slot
(VIDEO)