Optional Adaptors - Sony FWD-50PX3 Operating Instructions Manual

Flat wide display monitor
Hide thumbs Also See for FWD-50PX3:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 47

Optional Adaptors

The connectors marked with 6 and 8 on the side
panel are slot-in types and can be fitted with any of the
following optional adaptors (not supplied).
For details on installation, consult your Sony dealers.
For details on the optional adaptors for system
expansion, BKM-FW series, see each instruction
manual.
VIDEO INPUT Adaptor BKM-FW10
This is the same as the optional adaptor preinstalled in
the 8 OPTION 2 slot. See page 9.
COMPONENT/RGB INPUT Adaptor BKM-
FW11
1 Y/G, P
/C
/B, P
/C
B
B
R
the analog RGB signal or component signal output
of a piece of video equipment or PC.
2 HD, VD IN (BNC): Connects to the
synchronization signal output of a PC.
Note
When inputting a component signal, be sure not to input sync
signals to the HD and VD connectors. If you do so, the
picture may not be displayed properly.
3 AUDIO (Stereo mini jack): Inputs an audio
signal. Connects to the audio output of a piece of
video equipment or PC.
10
GB
/R IN (BNC): Connects to
R
RGB/COMPONENT ACTIVE THROUGH
Adaptor BKM-FW12
1 RGB/COMPONENT IN (D-sub 15-pin):
Connects to the component signal output or
analog RGB signal output of a piece of video
equipment or PC. For details on inputting a
component signal to the connector, see "Pin
assignment" on page 42.
Note
When inputting a component signal, be sure not to input sync
signals to pins 13 and 14. If you do so, the picture may not be
displayed properly.
2 RGB/COMPONENT OUT (D-sub 15-pin):
Connects to the component signal input or analog
RGB signal input of a piece of video equipment or
PC. Pictures input from the connectors marked as
1 above will be output.
3 AUDIO IN (Stereo mini jack):
Inputs an audio signal. Connects to the audio
signal output of a piece of video equipment or PC.
Note
When the display is not connected to an AC power or is in
the standby mode, no signal is output from the RGB/
COMPONENT OUT.
MONITOR CONTROL Adaptor BKM-FW21
This is the same as the optional adaptor preinstalled in
the 6 OPTION 1 slot. See page 9.
STREAMING RECEIVER Adaptor BKM-FW50
For details, see the instruction manual of the BKM-
FW50.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents