eufy L60 SES (T2277) Manual

Also See for L60 SES:

Table of Contents

What's in the Box

*The Self Empty Station comes with the Cleaning Tool and Disposable Dust Bag preinstalled.

	Press and hold for 3 seconds to power on or off Press to pause / finish the current task when working
	Press to return RoboVac to the Self Empty Station Press to pause the current task when working Press and hold for 3 seconds to enable or disable Child Safety Lock
	Press and hold simultaneously for 3 seconds to reset the Wi-Fi connection

Install the Self Empty Station in a location that RoboVac can easily access. It is recommended to place it against a wall and on a hard, level surface rather than on rugs or carpets.
Always keep the Self Empty Station plugged in, otherwise RoboVac will not automatically return to it. When the Self Empty Station connects to AC power, the LED indicator on it is steady white.
Install the detachable base by pressing down both sides of it firmly until you hear a click.
Make sure the detachable base is seamlessly connected to the Self Empty Station, otherwise RoboVac will fail to return to the Self Empty Station smoothly.
Remove the foam blocks beside the bumper before use.
Attach RoboVac to the Self Empty Station and turn it on.
Fully charge RoboVac before use. The LED indicator on RoboVac will be solid white when fully charged.
Download the app. Follow the in-app instructions to set up the Wi-Fi connection.
You will be informed once a new firmware version is detected when RoboVac has been connected to the Internet. Please update the firmware promptly for an optimal user experience.
Start Quick Mapping in the eufy Clean app, and experience a hassle-free clean powered by RoboVac.

information

For more information on how to use the Intelligent Mapping feature, please refer to the Owner's Manual by scanning the QR code at Customer Service or visiting https://support.eufylife.com.

Do not flush the main unit with water.
RoboVac should not be allowed to enter ponding areas.
When RoboVac has returned to the Self Empty Station, the hair cutting device in the Self Empty Station will automatically turn on. Do not move the Self Empty Station at this time.
Once you have finished installing the Self Empty Station, do not touch the hair cutting slot on the Self Empty Station.