eufy RoboVac 11S MAX (AK-T2126111) Manual

Using Your RoboVac

Remove the sticker next to the power switch, and the foam blocks beside the bumper before use.

If you cannot remove the objects surrounding the Charging Base, check whether RoboVac can return to it without assistance or not; if not, contact eufy customer service for help.

• Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
• When the Charging Base is connected to AC power, the LED indicator on the Charging Base is SOLID WHITE.

Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange while charging, and is solid blue when fully charged.

Refer to the Owner's Manual to learn how to select other cleaning modes and to set cleaning schedules.

Important Tips

When using for the first time, follow RoboVac to observe and resolve any problems that may occur.

1. Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
   
2. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
   
3. Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
   
4. Keep RoboVac away from wet areas.
   
5. RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
   
6. Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They may work less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place a physical barrier to block off problem areas where the device may fall.
   

Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if entered.