eufy BoostIQ RoboVac 11S (T2108) Manual

Table of Contents

Contents

1 Using Your Device
2 Important Tips
3 Documents / Resources
- 3.1 Download manual

Using Your Device

Using Your Device - Step 1
information Remove the sticker next to the power switch, and the foam blocks beside the bumper before use.

Using Your Device - Step 2

information

Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.

Using Your Device - Step 4
information Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange while charging, and is solid blue when fully charged.

Using Your Device - Step 5
information Refer to the Owner's Manual to learn how to select other cleaning modes and to set cleaning schedules.

Important Tips

When using for the first time, follow RoboVac to observe and resolve any problems that may occur.

Remove power cords and small objects from the floor that may entangle RoboVac.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very darkcolored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They may work less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.