Settings Menu; Project; Load Project; Save Project As - Elektron Digitone II User Manual

13. SETTINGS MENU

13. SETTINGS MENU
The SETTINGS menu offers settings that affect Digitone II and can also be used to manage Projects.
Press [SETTINGS] to access the SETTINGS menu. Scroll the list by using [UP]/[DOWN] or the LEVEL/
DATA knob. Open a highlighted menu by pressing [YES].

13.1 PROJECT

13.1.1 LOAD PROJECT

Load Project opens a project selection screen where you can choose a project to load. If you wish to
create a new project, select CREATE NEW at the very bottom of the list. The new project will be a blank
slate.
If you load a new project it will replace the active project. Be sure to save your active
project before you load another project.

13.1.2 SAVE PROJECT AS

Save Project opens a project selection screen where you choose a slot to save the active project to.
You can also press [FUNC] + [SETTINGS] to save and overwrite the current project.

13.1.3 MANAGE PROJECTS

Manage Projects launches the PROJECT MANAGER menu. Selecting a project in this menu and pressing
the [RIGHT] arrow key will bring up a list of commands.
• CLEAR Resets the project slot to a clean state.
• DELETE Removes the project from the slot.
• RENAME Opens a NAMING screen where you can rename the project file.
• LOAD FROM Loads the selected project. This will replace the active project!
• SAVE TO Saves the active project to the selected slot.
• TOGGLE Toggles write protection on or off. Write protected projects cannot be overwritten, re-
named or erased. A lock symbols in front of the project name shows that the project is write protected.
• INIT NEW Initializes an empty file slot with a clean project. This option is only available for empty
project slots.
• PURGE ALL Purges (removes) all presets from the pool that are not used in any pattern in the
project from the RAM memory. The presets are not removed from the +Drive library. This option is only
available when you select the currently loaded project.
70