Tape Deck; Listening To A Cassette; Cd Synchro Record Feature; Recording A Compact Disc - Samsung MAX-L65 Instruction Manual

Listening to a Cassette

GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 24.
1
Switch the system on by pressing the On/Standby button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to...
Side A
Side B
Result: The cassette starts playing.
8
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
On/Standby
Demo
PTY
1
RDS
Display
Timer
/Clock
8
18
Press ...
TAPE ( ) once DECK 1 and DECK 2
TAPE ( ) twice DECK 2 only
Press ...
Preset/
Mono/ST Memory
TUNER
Band
2,7 D / P / S
DIRECT PLAY & SELECTION
Deck 1/2 REV.Mode
TAPE TAPE
6
CD
REC/Pause Synchro
Down Down
Up Up
8
CD–R/RW PLAYBACK
Tuning Mode

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD Synchro or press CD
Synchro directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
7
To stop recording, press
On/Standby
1

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load the compact disc.
5
Select the required disc.
Progr
CD 6
Select the required track on the compact disc and press
or
Shuff
7
Press the REC/Pause.
AUX
Result: REC is displayed.
Dubbing
8
Press the
Normal
HI - Speed
Result: The track is recorded on the cassette.
9
To stop recording, press
On/Standby
1
.
Demo
PTY
RDS
Display
Timer
/Clock
3
Preset/
Mono/ST Memory Program
TUNER CD CD
Band
D / P / S
Deck 1/2 REV.Mode DIRECT PLAY & SELECTION
Shuffle
TAPE
AUX
6
CD Dubbing
REC/Pause Synchro Normal
HI - Speed
7
Down Up
CD–R/RW PLAYBACK
Tuning Mode
Tuning Mode
on the remote control to set the compact disc player to Pause mode.
to start playing the track.
.
Demo
PTY
RDS
Display
Timer
/Clock
3,6,8
Preset/
Mono/ST Memory Program
TUNER CD CD
Band
D / P / S
DIRECT PLAY & SELECTION
Deck 1/2 REV.Mode
Shuffle
TAPE
AUX
7
CD Dubbing
Synchro
REC/Pause Normal HI - Speed
9
Down
Up
CD–R/RW PLAYBACK
Tuning Mode
Tuning Mode
Volume
+
_
Power
Surround
CD
Repeat
S.BASS
E Q
Enter
D.S.P
Phones
on the front panel
Volume
+
_
Power
Surround
CD
Repeat
S.BASS
E Q
Enter
D.S.P
Phones