ENGLISH
Digital Still Camera Mode : Functions
Setting the IMPRINT Option
✤
IMPRINT allows the user to place a date stamp on a image. Your camera has a built-in clock
that maintains the date and time in a 24-hour format. The camera clock needs to be set if you
plan to use the date stamp to imprint the date and time on your image.
Before you begin!
✤
Set the Clock (refer to the previous page).
1. Set the Power switch to
2. Press the MENU button.
3. Move the Joystick to the left or right to select
I
The SETUP menu list will appear.
4. Move the Joystick up or down to select IMPRINT, then move the Joystick to the right.
I
The available options are listed.
OFF - DATE - DATE&TIME.
5. Select the desired option by moving the Joystick up or down, then press the Joystick(OK).
I
The selected option is applied.
6. Press the MENU button to exit the menu screen.
I
From now on, selected IMPRINT option will be applied to picture takings.
[ Notes ]
I
Every image has its date and time information, regardless of the IMPRINT setting.
I
Once the date and time information is stamped on the image, then it is not removable.
I
The LCD screen may not display full length of imprint information, you will see full information when
you copy to a PC or print the image. It is not malfunctioning.
I
If you remove the batteries from the Camcorder for an extended period of time, or the batteries
become run out, you may need to reset the clock.
I
A separate clock setting for Digital Still Camera mode is required.
For further information on Date & Time setup for the Camcorder, see page 35.
92
92
(CAMERA) mode.
(SETUP).
1
4
2592
SETUP
BACK:
SET:OK
FORMAT
LCD
OFF
USB
DATE&TIME
DATE
DATE&TIME
IMPRINT
6
2/10
2005/01/01