Digital Still Camera Mode : Advanced Techniques
Loading Your Customized Settings
✤
After saving your MySET configurations as instructed in the previous page, follow these
steps to recall your MySET configuration at a later time.
1. Set the Power switch to
2. Set the Mode Dial to MySET.
3. Press the MENU button.
4. Move the Joystick to the left or right to select
I
The available options are listed.
MYSET1 - MYSET2 - MYSET3
5. Select the desired option by moving the Joystick up or down, then press the Joystick(OK).
I
The selected option is applied.
(CAMERA).
(LOAD).
ENGLISH
1
2
4
LOAD
MYSET1
MYSET2
MYSET3
131
131