Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP)
on the plasma monitor panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn". To avoid such image retention, reduce the degree
of brightness and contrast of the screen when displaying a still image.
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over
2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper part
of the product.
The product is making a 'cracking' noise.
A 'cracking' noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave tracesn of
borders displayed on the left, right and centre of the screen caused by the difference of
light emission on the screen. Playing a DVD or a game console may cause similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial afterimages. To prevent this effect, reduce the 'brightness' and 'contrast' when displaying still
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.