Resetting The Picture Settings To The Factory Defaults; Viewing The Picture In Picture (Pip) - Samsung PS-42C91HD Owner's Instructions Manual

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 16.
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER/OK button.
. Press the ▲ or ▼ button to select "OK"," Cancel", then press
the ENTER/OK button.
4. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ENTER/OK button , to select "Setup".
2. Press the ▲ or ▼ button to select "PIP", then press the
ENTER/OK button.
. Press the ENTER/OK button again.
Press the ▲ or ▼ button to select "On",
then press ENTER/OK button.
4. Press the ▲ or ▼ button to select "Source",then press
ENTER/OK button. Select a source of the sub picture by
pressing the ▲ or ▼ button and press the ENTER/OK
button.
The sub picture can serve different source selections
based on what the main picture is set to.
5. Press the ▲ or ▼ button to select "Size" of the sub picture
and then press the ENTER/OK button. Select a size of the sub
picture by pressing the ▲ or ▼ button and then press the
ENTER/OK button.
If main picture is in "HDMI" mode, "Size" is available.
. Press the ▲ or ▼ button to select "Position", then press the
ENTER/OK button.
Select the position of the sub picture by pressing the ▲ or ▼
button and then press the ENTER/OK button.
. Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the ▲ or ▼
button. Press the ENTER/OK button.
The "Programme" can be active when the sub picture is set to TV.
. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
 Source: Used to select a source of the sub
picture.
 Size: Used to select a size of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.
English - 21
TV Picture
rMore
Size : Zoom
Digital NR : Auto
Active Colour : Off
DNle : Off
Movie Plus : On
Reset : OK
Move Enter
Setup
TV
rMore
Wall-Mount Adjustment
Energy Saving : Off
HDMI black level : Low
PIP
Screen burn Protection
Move Enter
PIP
PIP : On
Source : TV
TV
Size :
Position :
Programme : P 1
Move Enter
Press the PIP button on the
remote control repeatedly to activate
or deactivate the "PIP".
OK
Cancel
Return



Return





Return