¦ ¦ Connecting¦a¦AV¦device VCR / DVD Using a Scart Cable HD¦connection Using an HDMI Cable HDMI OUT HD¦connection Using an HDMI to DVI Cable DVI OUT AUDIO OUT VIDEO OUT Using an Audio/Video Cable Component connection Using a Component Cable COMPONENT OUT English -4 DVD / Blu-ray player...
Plasma TV QUICK SETUP GUIDE ¦ ¦ The¦Supplied¦Accessories y Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Quick Setup Guide y Blanking Bracket See separate guide for installing the stand. y Stand (1EA) ✎ Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.
¦ ¦ Installing¦the¦Stand Preset Front Back ✎ Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models (Depending on the model) Step¦1.¦ Attach your PDP TV to the stand. ✎ Two or more people should carry the TV.
¦ ¦ Plug¦&¦Play When the TV is initially powered on, basic settings proceed automatically and subsequently. If you want to reset this feature, press the You can set the Plug & Play by selecting ‘Setup → Plug & Play’. Power Input On the screen, you can set as follows.