Safety Information; Preparation - Project Source EVALIN TL-7650E-WL-PS Manual

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.
• Shut off water supply
• Remove any water left in tank before removing toilet
WARNING
• Handle with care.
• Improper care may cause the warranty to become invalid.
CAUTION
• Do not overtighten nuts

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Make sure the water supply valve is shut off before installation.
Remove old floor bolts from floor flange. Clean any old wax, putty, etc. from base area (if replacing an existing toilet).
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Floor Flange (not supplied, may be able to use existing or a new flange
should be purchased separately), Water Supply Kit (Not needed if replacing existing toilet), Adjustable Wrench, Flathead
Screwdriver, Level, Nut Driver or Socket Set, Putty Knife, Tape Measure
5