Viewing Closed Captions (On-Screen Text Messages) - Analog - Samsung HL-T5089S Owner's Instructions Manual

Viewing Closed Captions (On-Screen Text Messages) - Analog

The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the
broadcasting signal, the Analog Caption function may operate on digital channels.)
1 Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Caption, then press the ENTER button.
2 Press the ENTER button to select Caption, then press the ENTER button.
Press the ▲ or ▼ button to select On, then press the ENTER button.
3 Press the ▲ or ▼ button to select Caption Mode, then press the ENTER button.
Press the ▲ or ▼ button to select submenu (Default, CC1~CC4, or Text1~Text4) you
want, then press the ENTER button.
Press the EXIT button to exit.
 CC1: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync with the sound, preferably matched to a
specific frame.
 CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the
program.
 CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
 CC4: Special Non-Synchronous Use Captions. Similar to CC2.
 Text1: First Text Service. This may be various non-program related data.
 Text2: Second Text Service. Additional data, usually not program related.
 Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are not sufficient.
➢ ● The default is the caption mode provided by broadcasters.
● The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI) modes.
● When the Caption is not available to view, change the setup value to CC1 and such.
Press the CAPTION button on the remote control to select On or Off.
English - 52