Picture Control; Using Automatic Picture Settings - Samsung HL-T5089S Owner's Instructions Manual

Picture Control

Using Automatic Picture Settings

Your TV has three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button.
Press the ENTER button to select Picture.
Press the ENTER button again to select Mode.
2 Press the ▲ or ▼ button to select Dynamic, Standard, or Movie, then press the
ENTER button.
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for general TV watching mode.
 Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or
Tint (G/R), then press the ENTER button.
➢
Tint (G/R) is not available in DTV or PC mode.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
➢ ● Each adjusted setting will be stored separately according to its input mode.
● When you make changes to Contrast, Brightness, Sharpness, Color, or
Tint (G/R), OSD color will also be adjusted accordingly.
5 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.
English - 28
Continued...