Changing The Screen Size - Samsung HL-T5089S Owner's Instructions Manual

Changing the Screen Size

You can select the picture size which best corresponds to your viewing requirements.
1 Press the MENU button.
Press the ENTER button to select Picture.
Press the ▲ or ▼ button to select Size, then press the ENTER button.
2 Press the ▲ or ▼ button to select the screen format you want, then press the ENTER
button.
Press the EXIT button to exit.
 16:9: Sets the picture to 16:9 wide mode.
 Zoom1: Magnifies the size of the picture on the screen.
 Zoom2: Expands the Zoom1 format picture.
 Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
 4:3 : Sets the picture to 4:3 normal mode.
 Just Scan : Use this function to see the full image without cutting off the picture
when DTV or HDMI 1080i/1080p signals are input.
Press the P.SIZE button on the remote control to change the picture size.
16:9
Sets the picture to 16:9 wide mode.
Wide Fit
Enlarges the aspect ratio of the
picture to fit the entire screen.
➢
● Only 16:9 and 4:3 are available in DTV, Component (720p, 1080i) and HDMI (720p, 1080i) modes.
● In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9, 4:3 and Wide Fit can be selected.
● You can select the 16:9, 4:3, Wide Fit and Just Scan screen sizes in the Component (1080i, 1080p), HDMI (1080i, 1080p),
or DTV (1080i, 1080p) mode.
● In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the screen by pressing the ▲ or ▼ button.
● Each adjusted setting will be stored separately according to its input mode.
● When watching an HD(High Definition 720p,1080i,1080p) signal, you can use Wide Fit.
Wide Fit sets the optimum picture format by expanding it both horizontally and vertically.
For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not support all external devices (DVD, VCR
etc.).
Zoom1
The screen size when Wide screen
is vertically enlarged.
4:3
Sets the picture to 4:3 normal mode.
English - 30
Zoom2
The screen size when the Zoom1
screen is vertically enlarged.
Just Scan
Use this function to see the full
image without cutting off the picture
when DTV or HDMI 1080i/1080p
signals are input.