Download  Print this page

Samsung SyncMaster 400UXN-3 User Manual Page 80

Samsung 400uxn3: user guide.
Hide thumbs


Table of Contents
Main Icons
Add a Device
Remote Control
Safety Lock
Fault Device Alert
Use the main icons to switch into each screen.
You can add a device by entering the IP address configured on the monitor.
Allows you to enable or disable the remote control signal receiving function of the display unit.
Set the Safety Lock function.
When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
When connecting to the monitor fails, it turns the function that transfers the result through an email on or off.
Selects a Lamp adjustment mode.
Select a display from Display Selection.
All of the monitors can be selected or deselected.
Use Control Tools to control displays.
10. Switches the OSD function On/Off.
- May not be supported depending on the product.
<Note> The remote control Enable/Disable function operates whether or not the power is On/Off, and this
applies to all displays connected to the MDC. However, regardless of the status at the time the
MDC is shut down, the remote control signal receiving function of all displays is initialized to
Enable when the MDC is closed.
Add a Device
Lamp Control
Display Selection
Control Tools
OSD Display


Table of Contents

   Also See for Samsung SyncMaster 400UXN-3

   Related Manuals for Samsung SyncMaster 400UXN-3

Comments to this Manuals

Symbols: 0
Latest comments: