Add A Device - Samsung SyncMaster 320TSn-3 User Manual

9. Use Control Tools to control displays.
10. Switches the OSD function On/Off.
- May not be supported depending on the product.
<Note> The remote control Enable/Disable function operates whether or not the power is On/Off
applies to all displays connected to the MDC. However, regardless of the status at the tim
MDC is shut down, the remote control signal receiving function of all displays is initialized
Enable when the MDC is closed.

Add a Device

1. Enter the IP address of the monitor to be connected and press the Add button to add the IP address
click the OK button, adding the monitor is completed.
System
1. Click System in the main menu to open the system adjustment screen.